jasons

Anything will work just have a little imagination. Lots of alternatives besides spending 200 bucks on IMS pegs or extender kits.

i bought a set off a 09 and just put my stockers in the middle. little bit of cutting and grinding and welding this is what you get

x2

http://www.ebay.com/itm/Sand-Skate-II-Tires-and-Rims-Rear-/270850014180?pt=Motors_ATV_Parts_Accessories&vxp=mtr&hash=item3f0feb3be4 http://www.ebay.com/itm/YAMAHA-BANSHEE-YFZ450-YFZ-450-WARRIOR-Rear-SAND-SKATE-II-DUNE-tires-RIMS-29-/380380998275?pt=Motors_ATV_Parts_Accessories&vxp=mtr&hash=item5890796a83 http://www.ebay.com/sch/i.html?_nkw=sand+skate+tires&_sacat=0&_odkw=sand+skate&_osacat=0&_trksid=p3286.c0.m270.l1313 they dont make these anymore so its hard to find a decent set or at a decent price. make sure you ask for the date code so you know when they were made. Best sand for duning hands down just picked up a decent set myself yesterday off craigslist in san diego.

http://norfolk.craigslist.org/for/2701674422.html

http://www.lsracing.com/img/Guide_21.pdf should work with adjustable arms

do you have a aftermarket stator cover

here is the pic of the head. free bump for ya

Not for sale anymore.

text sent. no answer

as suggested i would look at the chain and carrier area. my carrier came loose while riding before and i didnt notice it but it would make a clunking noise and the chain was jumping.

I have up for sale is a nice looking used Lonestar Racing -2 Swingarm would be great for someone that does MX. Color is Silver Vein, no major scratching looks real nice. No carrier bearing, just the swingarm and skid-plate. If you dont want the skid-plate i can take it off and scrap it. looking at 250 shipped. Possible trades maybe let me know what you got. looking primarly for 28mm pwk or 33mm pwk carbs

those pt's look like mine that i traded a case of Corona for and JL rechromed them.

i dont have any suggestions for a certain kit but i do know it take about 6 hours to put in.

honestly dude, you had a rock the size of a peanut lodged in your reed. i wonder how much shit was passed through it during that time. i would pull the head and quit wasting your time on other stuff. sounds like you got a gravel pit at the bottom of your crank

Check your compression again. If you still dont feel like your gauge is right try another. if all else fails pop the head and look at it. pull the reeds out again and see if you can feel anything on the top of the piston. if all else fails pop the head and look at it

yes you do. ricky stator sells the regulator for it. just find a cheap 7ah or 10ah battery on ebay search UPS batter and make a battery box and your good.

why dont you just pm him, instead of just calling him out in front of everyone. try to fix before you bash him.

http://www.ebay.com/itm/Slim-HID-8k-10k-6k-Kit-Slim-Ballast-H1-H3-H4-H7-9006-/330574288024?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item4cf7c35498 this is the exact kit i have just make sure you get the h6m kit they fit in the oem housings

Hope the TZ bearings dont fail like that in my little 4mil duner.

if you get a 250w stator and convert it to dc to run hid you loose a lot of watts during the conversion. for a 250w stator you will see approx 190 watts according to ricky stator and electrosports. look at the HID kits on ebay and most of them are 35w kits. just search banshee HID kit of ebay you should be able to find the kit for like 45 bucks. dont forget your battery, regulator just my 2 cents

just like the title says. i have a yellow tank cover looking for a black one. if you want to trade let me know. or ill buy it out right.

just take it to hjr he is only a few miles from you and is very good. scribbs is shit imo over priced on everything. there is another place called veys in san diego that does decent port work. but hands down hjr will be the man for you and have him true and weld your crank for 65 dollars. and just fyi scribbs didnt bore your jugs they send all there stuff to alba and then over charge you for it.

nothing a little steel wool cant handle to clean these up. should look good with a little elbow grease

Post Pics.