92 Z71

I have a rear grab bar it's stock and scratched on the bottom side.

Pro Taper SE Carmichael bars - $40 Works Triple Rates - $400 IMS/Roll pegs - $150 FMF Fatty's - $100 Chain guides - $50 Braided brake lines for +2 arms - $55 Rox Risers - $25

I do still have the pipes. Just letting you know before hand they don't look too great, they are not dented or cracked they just don't look good. Also the mount tab on the left silencer is bent.

Anyone interested in my bumper? It's like brand new, mounted it up on the Banshee and never rode with it. The end caps come off the top bar and are threaded inside to store extra spark plugs. $150

SOLD!

Maybe, what do you have?

It's coming apart today, anyone else want anything? Swinger, Reeds, and Trailtechs are sold.

I only have a twist throttle, and I still have the pipes. $30 for the throttle and new cable. The cable is for carbs with tors removed.

It is basically like a stock frame except stronger. All stock parts will bolt up. It is made of chromoly tubing.

The reeds are in great shape, I don't have a picture of them or know how much time is on them, I bought them a while back from a member on here, they looked great when I got them and I haven't even rode the bike with them installed. The engine is in really good shape, I had the cases replaced because my originals were cracked, these cases are perfect. I had an engine builder here locally put it all together for me, it's all stock except for a billet water impeller. Last I checked the compression was right at about 120psi.

The a-arms are Wicked +2+1, the pipes are FMF fatty's with powercore 2 silencers (the probably need repacked) oh and the left silencer is tweaked a little it doesn't sit straight up and down when mounted. Here is a picture of the back of the quad, has a different set of pipes in this pic but everything else is the same.

The bars are brand new. I'll try to get a pic later.

Once the frame and engine are spoken for I'll start tearing it down and shipping parts out. All prices are shipped. Frame-$300 Engine-$900 A-Arms-$350 Works triple rate front shocks-$400 Janssen -1 swinger-$200 Roll/IMS pegs-$150 VForce 3's-$90 Trailtech's-$90 FMF's-$100 Billet bumper-$150 Chain guides-$50 Sprockets-$30 K&N pods-$40 Braided brake lines FR-$60 That'll get it started, I want everything gone so if there's something you don't see ask. Post in this thread if you want something so I can keep track of who gets first dibs on what. A lot of these parts are new with not one ride on them. Frame has fresh powdercoat, and the engine has just been professionally torn down and rebuilt because I had the cases replaced no chain whack or leaks anywhere. I am located in Vegas. I will also need a little bit of time getting parts shipped out because the whole thing is assembled right now.

$1000.00 shipped.

Also has Rox risers and K&N pods.

I have an Arens 250R frame that I got off of ebay back in July, it has new powdercoat on it and is ready to be put together. It will come with motor mounts, subframe, headstay, and brake pedal setup. I also have an 88-89 swingarm I will throw in with it. $1200 shipped.

1999 Banshee, completely rebuilt with many aftermarket parts. Fresh powdercoat on frame, +2+1 a-arms, works triple rate shocks, Janssen -1 chrome swingarm with Honda bearing carrier (makes for very easy chain adjustments), braided brake lines, pro taper bars, Roll/IMS footpegs, v-force 3 reeds, FMF pipes, trailtech lights, some billet parts, twist throttle, new chain and sprockets, new chain guide and rollers, TORS removed, engine professionally rebuilt bottom and top end. Over $5,000.00 invested, asking $2,800.00 OBO, located in Las Vegas.

It is a long ways, the bad part is I'll be in Indiana next month but I have no way of bringing it with me. I bought the bumper new probably about 8 months ago.

Bring it out to Vegas and I'll trade you.

Look like Wicked's to me.

That would be great, you workin tomorrow?

I may head that way in the morning, apex is really beat up, whoops everywhere at that place.

I doubt I'll be able to ride in it, I might go and watch though. I'm thinking about taking it out tomorrow early morning to apex, unless you know of any better/smoother riding places.

Saturday Sept, 5th there will be atv/dirtbike barrel races in Pahrump. It's supposed to be an all day thing from 6am-10pm. Contestant registration is 7am.

I think it's a chinese knock-off.