quad4914

Boost bottle not included, sorry. Any questions or need more pics just ask.

The vforce have more tip area that gives a quicker throttle response. Over all they just flow more air than stock which helps topend. One I believe but have never heard adressed is that they take up more space in the case which reduces volume in turn making the charge blow through the transfer ports with a little more force. In a time not to long ago the factory teams practiced a term called case stuffing. They would use a thin coat of epoxy on the inside of the case to reduce case volume to get more of the intake charge into the cylinder rather than hanging out in the case. My 2 cents anyway

Does this have the .25 or .26 engine?

Have a set on the way

These are the stock ones

Title pretty well describes. Both sets pulled from running machines. The 33 or 34mm mikunies are round slide. Pics dont show slides & caps but they are included. Shipping is continental usa only. These are in richfield ut. My ebay user id is 81cr450 if you need some feedback about me . Both sets could use cleaning.

I think I found some carbs. So these are up for sale. $150 with pods shipped for the 33-34 mikunies. $40 shipped for the stock carbs & 2 into one filter.

I need a set of upper j-arms. Preferably a good matched set. A nice price would be great too. I just powdercoated mine & cooked the plastic ball joint cup in them... Live & learn least i didn't do the lowers at the same time, like I normally would.

Bump for the excellent help thanks for the input

The crank & boost bottles have been swapped. I still have the carbs, if anyone wants a set of stock carbs & set of 33-34mm mikunis for a single set of keihin 33-35mm flatslides I'd be happy to trade. Would work good for someone wanting to go back to stock & still have another set you could make a couple bucks off.

I just bought a reciever for an ar-15 I'm building. I had to have it shipped to a local FFL licence holder. FFL Federal Firearms Licence. I can buy the rest of the gun parts & have them shipped right to my door, but big brother wants to track the serial #, which is on the reciever. Its not to hard to have it shipped just contact a local gun dealer & he can help you arrange it for a fee. $25 to $50 is what it usually costs. Hope this helps.

Hi I need to get some swapping done. I have a good used welded crank, stock stroke & rod, I would like to swap for a good used set of vforce 2's. I could even send my my old boysens & cages if that helps. I would also swap the crank for a good j-arm frame if your in utah. The crank was pulled cause I cooked a piston, so had a good excuse to go to a 4mm. Seems nice & tight. I cleaned it up with solvent , wd-40 , & a little snap-on air tool oil to keep the bearings lubed. I also want to change my carbs to keihins after cooking the pistons, I need less jet choices. They're 33mm or 34mm round slide mikunis that ran great all summer but when I fired it up to go riding in the snow in 30 degree december weather the jetting was off. DOH. Any way I have these mikunis & a set of stock ones with tors and a 2 into 1 airfilter that I'd swap for a set of 33mm - 35mm keihin flatslides. The slides aren't pictured but I have them on the bike as I will retry'em if no one wants'em. I'd also want to keep the pods if the keihins dont come with pods. Boost bottles ... I have 2 I'd trade for a stock crossover tube. They have a little wearfrom the cable riding on top but all in all their good. Any questions just ask. I hope I dont regret this but you can just call if its easier 435-896-1995. And as for feedback I dont have any on this site but my ebay id is 81cr450

I think its just lightened cause the plastic FITS, the lines of the quad but I'm not sure. It was made for duneing at sand mountain here in utah. The swingarm & chrome lower a arms are on ebay. Swingarm A arms

You've all seen carbs & the rest. Thanks again bansh-eman

Narf

Stock 2001 frame thats been modded

Richfield ut smack dab in the middle of the state

Hello I have a 2001 banshee drag frame with papers, Lightened to the gills, & I would like to swap the frame for a stock one. I'm more of a trail rider & I'm affraid I ride a little to rough to use this frame. Just got the bike today & it seems to run awesome just working on turning it into MY bike. I also have some crome j-arms that I got in the deal. Theres 4 arms but only 3 are chrome. Theres a + 6" or 7" ,looks 7, swingarm that looks new & unused does have just a hint of surface rust can glass that off before I ship it though. I also have a set of stock carbs with tors & a 2 into 1 airfilter. I'm looking for a good clean frame , good stock plastics , new rear tires , stock front rims , psi inframes , The list goes on and on, the frame is what I really NEED though. Any help would be appreciated Email for pics to large to upload

Hi this is what I have , http://www.ksl.com/index.php?nid=218&ad=3445910&cat= , send some pics to [email protected] if interested. If I'm to far away Thats cool too.

Hi I have a bike you might be interested in. http://www.ksl.com/index.php?nid=218&ad=3445910&cat= If you are give me a call 435-896-1995. Thanks Scott