Rodneya
-
Posts
576 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Posts posted by Rodneya
-
-
A stock banshee is fun for about a week. Pipes and porting will get her going. You will definitely not regret it. Although you may have second thoughts when you are trying to jet it. :biggrin:
-
Little bit off topic, but what tires do you have on the rears in your sig?
-
-
Expansive for something you don't really need.
-
With 200 mains, pipes with an open air box you are gonna melt that thing for sure. the amount of smoke is not a jetting guide. You need to get in the ballpark range and do some plug chops.
If that was my motor I would not even start it.
-
What carbs are you running
-
I am trying to hook up a 3 way fridge in my RV and dont really know how to hook the 12v up. It works on propane and 120v.
There are 2 white wires from the fridge for the 12v hookup and they both look the same.
My question is, does it make a difference which way I connect positive and negative or not.
-
MOST SEMEN SWALLOWED
Michelle Monahan had 1.7 pints of semen pumped out of her stomach in Los Angeles in July 1991 (assuming U.S. pints, that
-
-
Just remember that it will all be good in the end. I am with my second wife after the first went psycho, so I know all about the exciting process of divorce. Don't over analyze or obsess over it, and you will be a free man soon.
I spent 2 years in the military, and although it feels like forever sometimes, the time passes in a flash. Stay safe.
-
Have a look in the repairs and mods forum. it will be near the top.
-
How does it work in the US now. Did Yamaha stop selling 2 strokes, or are they banned from being sold altogether?
-
Short of the lines I've heard firehead use to pickup pirate hookers, that is possibly the worst advice I've ever read on any forum.
?? You need to use pickup lines on them down there
-
Turbinecore are silencers, not pipes. Check out blackedout96 post in the for sale section
-
-
I am just wondering, are the 2 Banshees for $6500 new or used?
Brand new
-
Where are you located?
Look on the left by my avatar
-
Looks pretty cool. Where did you get it from?
-
Take some video of the first time you start the FASTEST Banshee in where ever and post it here.
By the way, have a look at post #2. Blowit was spot on
-
Have a look through here for similar setups.Main jets thread
Also have a read through this jatting FAQ
You will be better off buying a selection of jets in the approximate size range that you need rather than jet kit
-
Rodneya would u liek to put some info in this topic as well.
they look cool bolted onto your motor and allow you to change domes for more compression. More compression = a bit more bottom end mostly.
-
The higher the compression the more bite your bike will have like instead of power wheeling up to 3rd ... you can power wheelie up to 5th and 6th...you will have more over all grunt and bottom end to your bike with the aftermarket heads, but the higher the compression you go like above 150-160ish you should run race fuel or higher octane
More Bullshit
-
Depends on your elevation, but 21cc or 20cc is the most popular. They give you 70% better cooling over stock and the lower cc you go in the domes gives you higher compression. But with higher compression you need higher octane to avoid detonation
Bullshit
-
How much do you think that is worth.
There are two identical banshees down the road from me for $6500 each
Clutch
in Banshee Repairs and Mods
Posted
Stock steels are a weird shape, and not perfectly round. There is a a bit of a dip and a tab on the outside edge.