Midway USA

I bet I don't have enough posts, but here I am anyway!!

Listed them on E-Bay. Here is the link if anyone may be interested: E-Bay Banshee Jugs

Sorry but no. I have more in the cores and machine work than that. I'd like to have at least $275. I got these ready for spares for my Banshee but am trading it. Guess maybe I should have thrown them in on the trade to sweeten the deal.

Click here for pictures

I have a set of 1995 Banshee jugs with a fresh .020 bore fit to a pair of used Vito's Super Stock pistons. You will get the pair of pistons, pins, jugs, and upper end Wiseco Cometic gasket set (gasket set is complete except for reed cage gaskets). I do not have rings or circlips but the pistons use standard issue Wiseco parts. The intake runners have some blending done. The exhaust runner is polished, and the bottom of the transfer ports has had the casting flaws blended and cleaned up just at the opening. Ports are chamfered. Anyway I am taking offers if anyone is interested. I have pictures I will post later, or upon request.

Ok don't flame on me for saying it, but I am contemplating trading my Banshee for a Raptor 660. I know the guy who owns it, not that it matters. Anyway the 660 has aftermarket shocks on it and he wants to keep them. Commented that he would like to put them on my Banshee and me keep the stick Banshee shocks to put on the 660. I know guys have done 660 shock on Banshees in the past, but can you swap the other way? My thoughts are that it will lower the 660 which would be fine with me as long as they fit. The rear shock is the one I am worried about. Will it bolt up or am I going to have to mod the hell out of things to make it work? A little voice keeps telling me I am a fool to get rid of the Banshee. The thing is, I don't get to go to the dunes enough and I just hate trail riding the Banshee. Especially after recently getting a Warrior 350. Since I got it, I rarely even bother loading the Banshee on the trailer and hauling it. Anyway I am still thinking hard on the matter and just wanted some input. Thanks in advance.

I am sure the dealer can get the bolts too. I wouldn't think they would be that expensive, but I could be wrong.

You can get the boots from the dealerl. I just ordered a couple the other day for my Warrior. Same part number as the Banshee. They are about $2.50 each. Part number 1UY-25917-51 1 boot per package

Not one phone call or any offers. I have it listed on Racing Junk, Craigslist, Waynoka forums page, and tried on E-Bay twice. There are lots around here with cool heads and more aftermarket stuff for less money. On paper I can't get less than $2500 or I feel like I am losing money on it. I completely went through the engine about 3 years ago, but have only had it to the dunes about 10 days or less total in that time. I hardly ride it around here because it just isn't much fun on the trails. I am trying to come up with funds to buy another Warrior and go through the engine on the Warrior I currently own.

Can't seem to get it sold and can't just give it away for the money invested. For now just checking interest. Don't want to start a part out and have only part of it sell then have the rest lying around. Interested in best value for the parts and will decide from there. If I part it out, the wheels and tires and rear hubs are not for sale. Banshee Craigslist ad

Creepin up on 45. First ATV I ever owned was my Banshee and got it at 42. Recently acquired a Blaster but hate it. My boy is 8 and we ride semi-regular. He has a Raptor 80 at the moment. Love the dunes but just can't afford to go as often as I would like.

Lookin for a decent set of front shocks to put on my Blaster to improve the suspension. I have a set of shocks that some idiot cut the springs on if anyone has just some springs.

I used a cut off part of a broom handle to prop mine up and used a heat gun. It worked very well for me. Same concept as the propane torch but maybe a little easier to control.

If you don't sand or glass bead the chrome off, the paint will never stay on. Nothing really sticks to chrome very well. I used a scotch brite pad on a Blaster FMF pipe then painted and within a few rides the paint came off . I used the VHT high heat header paint which we use on car manifolds with great success. When we put chrome valve covers on a car engine, we glass bead the area where the gasket sits otherwise no sealer sticks and they always leak.

Ricks Motorsports Electrics. They sell complete stators or will rewind yours. Talked to the guy a while back and he seems to have a handle on building quality stators.