colby72olds

^^haha.....me too, Jeepin, cars, drinkin, & girlfriend

Just as Dark Ranger said "Leverage is a wonderful thing". I went to my buddies junk yard and they had an old military truck with a huge vise on it, we walked around until we found something we could use for more leverage. We found about a 4ft. piece of tubing and wah lah, easy as that. Thanks guys

Thanks guys, tonight I will try it with some more leverage then worst case I will cut it off.

I got the first one loose, but the one that's next to the carrier is stuck. I've done about everything trying to get it off. I've used about 2 feet of leverage on the wrench, while my dad keeps the axle from spinning and all I do is lift him off the ground. I've held my heat gun to it for about 5 min and used WD-40. I've let other people try too, but nothing is working. So any of yall have any experience with this? I have been messing with it off-and-on for about 2 weeks and it's holding me up on getting to the powdercoater. I need some idea's bad!! Thanks HQ

Honda Sportrax 90 all the way. I've had my little cousins at my house for about 2 months, I beat the hell out of it every day and it always cranks first pull. We've never had one problem with it.

I wouldnt let it sit on plastic very lit long, if at all. I let the aircraft remover soak for about 30 min then I used fine steel wool to scrub it off. Be sure to wear gloves, as mentioned....this shit is painful on your skin.

I used the air craft stripper and fine steel wool and it came right off, and of course I wore gloves.

I would atleast get pipes, you need supporting mods to get maximum performance from porting as well as anything. More air in, more air out!

^of course he's joking...how many good looking, fast 300ex's have you ever heard of? lol

I like the paper plate taped to the front! :biggrin: :thumbsup:

lol^^....They did sell me the wrong ones, but these are correct. Thanks

Ohhh, I see now...lol Thanks man, Colby

I ordered .050 over on Dec 17 and when I recieved them, the piston boxes they say "clears 0.000030" (give or take a few 0's). I call the place I ordered them from (to be sure) and they said that it should say "clears 0.000050" so I waited a week for UPS to pick them up. After UPS picked them up, I waited another week and recieved the exact same pistons I sent back. I was pissed, I called them and they said it was their fault and that they typed an "S" instead of a "5" for the part #. I try to be patient and understanding but damn. I wait 3 days for UPS to pickup those and another couple of days for these to come in. I got them today and they say the exact same thing (all in all it's been a month and one day since I ordered them). Once again, I was pissed....I call them and tell them that I got the wrong ones for the THIRD time, they put me on hold for a while, then tell me that they're suppose to say "clear 0.000030" and that they will say .050 over on the pistons...WTF. So after all my rant, they don't say that on the piston (theres a long # with the last two #'s being 50) is that right guys? I know if I take their word and use them, they will try to pull some shit saying they can't return them since I tried installing them.

haha, that's what I was thinking....I'm a F-body fanatic, so....hell yeah :thumbsup:

Nice, I got that same HJC helmet :thumbsup:

Awesome, thanks for clearing that up man....I was so confused lol. So a 20x10x10 it is!! Thanks, Colby

will someone tell me what size tires you would get? 10x6? 10x9? thanks alot

4/115 Douglas .125 Wheel 10X9 3.0 + 6.0 - 2000 Yamaha BANSHEE 350 (Rear) Part# 1087590019 44.99 2 $89.98 4/156 Douglas .125 Wheel 10X6 2.0 + 4.0 - 2000 Yamaha BANSHEE 350 (Front) Part# The 10 is my rim diameter isn't it? Well I hope my fronts aren't 6 inches in diameter and 10 inches wide I'm looking for a tire that is 10 inches in diameter, I'm just unsure of what exact size to get...I can figure out vehicle tire but damn I'm confused with this.

oh good thing I didn't order them, why won't they fit? I thought 10x9 wheels is (10 inches tall, 9 inches wide) and 20x10x10 (20 inches tall, 10 inches wide, 10 inch rim)....I'm probably wrong, but I know I'm confunsed :S mostly asphalt dragging and country road riding

First of all, I used the search haha. Would a good choice be a 20x10x10?

^^haha, that's funny as hell. A moder lol!!

I ordered some douglas .125 10x9's.....what would be the best looking/performing size tire? Sorry for dumb questions, this is my first 4-wheeler. thanks guys

Awesome, thanks man

couldn't find an "edit button".....also, what offset wheels would yall recommend, mostly ride on asphalt and pastures.

no tension...it comes out easy once you get the bolt out of the shock