wiecha17

http://www.s10forum.com/forum/ that site should be able to help you...

hey guys thanks for all your reply's but i ended up with a smaller system just enough that it sounds good in the truck but doesnt rattle it to the max. and i ended up building a 400hp sbc for it due to i wanted to have more hp so people can here the truck instead of hearing my music.

a bit more work done tonight.. one oem gauge some colour let me know what you think

a couple more pictures of the process as it comes along ..

well up date on my truck.. well theres your problem right there more to come. long story short. full rebuild needed. cause of problem block and crank ready to be shipped out "no replacement for displacement"

its carb'ed here are some up dated pictures of it today as it sits , well enjoy, any tips or anything to make it better feel free to say

o ya there is a 350 in it and a 350 turbo trans. and a set of 20's are comin this weekend .!

hey guys this is my 85 s10. just finished building it. let me know what you guys think . it took me about 8 months on and off. i didnt have full time to work on it due to school and just getting into university.

you wanna find out why its leaking oil . if you find out why and help me fix it ya ill be there ! but no money this year..

hey guys i just am about to finish up my 85 s10 build and i need to have a light for my rear lience plate for night driving but i dont want to have a huge light sticking out and i just had the truck painted and want to keep drilling or anything to a min or none at all. so im requesting pictures of what you guys have out there any ideas or suggestions would be a HUGE help

well this is what i ended up with . i have 2 10" pioneer subs, and a alpine v12 amp. and the system pounds HARD. and just barely fits in the s10 but sounds soo good.

adam your paying 150 a tire are you nuts man your getting robbed . i can get them for 89 a piece. and once my girl has been working there a bit longer. i might get them for even cheaper !!! , dam son you must have deep pockets !!!

im on a stock 05??? you should of passed me if you didnt your shee is WEAK !!!! if i had as much money as you in my bike i would be ahead of you no prob !!!

adam where did you beat a rath trx 450? if you talking about dave i think he was ahead of you. along with mike. on the yfz. dave and i were on your ass on pretty much stock yfzs???

i think you should make it pink adam. it would really suit you alot ! you going to try and get this to beat marks 450? daves or mikes?

hey buddy i had the exact same problem to choose between my banshee and 450. ( was was riding trails plus flat track) i bought a 05 yfz450 last winter . rode it through the winter. while modding it ( pipe nerf. intake jets. the basics ) on the flat track it handled amazing. the power was all there. i took quite a few hole shots that i never got with my banshee. i ran my fastest time on the 1/2 mile oval. almost beat a guy with a banshee ALL done up. and i was on his ass the whole race ( on a stock 05) and im have been riding for 3 years... trail riding is the best with the 450! .... if i was to do it all over again i would of bought a 450 right from the start. my advice get a 450. ( yfz) and it wont let you down!!! :thumbsup:

ya but im not riding my banshee any more. since i got my 05 yfz. i have raced it and loved the yfz. the banshee just sits there... ( and no matter how i look at it i need to sell it for uni. next year....)

hey guys. theres a guy who wants to trade his 1997 xp. for my 03 shee. with tirinity pipes , asr arms ( +2 up1) dura blue axle. tors removed. twist throttle. K&N pod filters, tip rims all round. and nerf bars with all the stock parts. for that sea doo. with trailer ( and it has just been rebuilt). is this a good trade. or who is getting the better deal. ??

what do you mean by spl or sq?? and i know i need to run all different wireing for the speakers .and power. but another question do i need to run a capacitor? and do i need to run two bigger wires to each amp? ( sorry if these are really stupid questions im just really new to the whole sound system and electrical scene.) and would this amp work well with the subs? NEW BLITZ AUDIO MONO BLOCK CLASS D AMPLIFIER 1000W AMP Specifications: 2 Ohm Stable MOSFET Power Supply PWM(Pulse-Width-Modulated) System Glass Epoxy PCB Gold plated RCA Inputs Gold plated Line out Custom Terminal Block for Speaker Connections Thermal,Overload & Short Protection Variable Low pass Filter (50Hz~150Hz,24dB/Octave) Variable Subsonic Filter (15Hz~40Hz,24dB/Octave) Phase Control 0-180 degree Remote Bass Control Input Impedance:10K Ohms Soft Turn On/Off BLUE Lighting Illumination 6+6 LED Level meter 1x250W RMS @ 4 Ohms/1x1000W Max @ 4 Ohms 1x400W RMS @ 2 Ohms THD: 0.1% - S/N Ratio: 90B Input Sensitivity: 200mv~4V Freq. Response: 20Hz~250Hz Dimensions: 10.23''(W) x 2.2''(H) x 9''(L)

k im thinking either a pioneer or apline deck. then an amp. not to sure what kind or power range for these subs-----> 2 10 inch kickers ---Specification 10" 2 OHM VOICE COIL SUBWOOFER 400 Watts RMS 800 Watts max Sensitivity 87.2 db Freq. response 25 - 500 hz Mounting depth 4 - 3/16" Mounting diameter 9.1/8 Spring loaded terminals Sealed enclosure volume min.- .8 cubic foot Max volume 3.0 cubic foot Vented enclosure vol. 1.25 - 1.75 cubic feet ( are kickers good??) so what kind of amp how many watts should i get ? 1000 wat amp or ? and would it be power full enough to power an extra 2 -4 small speakers in the doors ( and im going to make a custon bracket. to mount the speakers to.

hey guy i just bought a 87 s10 with a 350 small block and a 350 turbo trans. for 1000 bucks . and now im looking for a sound system for it . i need help with brands prices and what else i need to run this system. i wanna run two 10" subs. and either 1 or 2 smaller speakers in the doors. and a new deck. i dont want to cheap out on the sound system but i dont want to go too crazy and blow all my money on it. so question is what type of speakers/ subs would be the best. what wiring do i need? amp? ect and if you could say how much this is going to cost roughly ? -scott

hey guys we need some riders at least one for this saturday the 6th ( tomorrow) its welland county motorcycle club heres the web site http://www.wellandmotorcycleclub.com/ if anyone is going to come can you reply back

with the truck with that paint job is that gloss black with metallic blue flame or ?

lol thanks man it took quite a few long hours to get that truck where it is now it was used as a farm truck and was treated like one. but thats my first truck so i love it. none of the people in my grade have there own cars or trucks they all drive mommy and daddy's. i cant wait till they have to pay for their own car !

lol wow your guys sure put my truck to shame but its the best i can do for now i rebuild it off another farmer re did the engine body paint and seats. lot a work but is an 85 toyota 4X4 still fun to roll up to school when its caked in mud. paid for it all my self and did all the work ( same with the bikes) http://i285.photobucket.com/albums/ll54/wiecha17/yfz013.jpg