inthemail

Im willing to bet hes just down right now, shit. for those who think there getting ripped put yourselves in his shoes. sure it sucks to think about money being gone with nothing in return (im waiting on fucking pocketbike parts for 2 months ago now) but CFM has done some great buisness with us so we should still support his ass for a little while longer. mabye go nail your girlfriend and imagine it cost you $500

kaos is right on the mellow, i knew one that was like a 300lb cat never barked haha

as far as i know, the useful ones are a digital bore guage and caliper and feeler guages. anything else i really need?

everything looks minorly unhappy inside, from being a bit rich to being "heat polished" (the domes) im with the other guys who are saying it ran out of fuel, one side of your delivery hose has a longer path. stupid eh?

horsecocks! ohton! Shit! piss! lollypops! nice pipes. never saw a set like that

maaaaaan i smoke like a fuckin chimney. pack a day keeps the quit sickness away! light up and draaaaag. however! i have quit 3 times, and probley cant now for a while. the smokes i have now every day, i know they are going to be harsh and taste like shit even before i light them even when i buy them but i cant stop. if wake up in the morning and dont have a smoke look the fuck out. but if i only have that morning smoke i can forget about it all day so heres my advice nayr. wake up and have a morning smoke and think positive about what your doing and dont cheat, its cold turkey in a smokers mind. you get sick because of not having the morning puff. guarenteed. so if you have the mornign smoke and wake up right, go about your day while not smoking chances are your going to get laid that night cause your o hapy the day went so fast and you didnt have a smoke your gonna get off and pass out exhausted. and probley do the same the next day.

you end up there when the purple fmf powerband kicks in.

money could be made here. im not sure which one because i have never done it and the guy im thinking of im not in touch with anymore, his name was Ian Horne. it would require just a few simple measurements of various balljoints and a measurement of the hole the stock one comes out of.

nuff said. dont order shit from him he even staded inthe auction that the shipping fees were to cover the border crap. fuckin idiot, well see if i get my refund. im glad i never got the chance to break my neck on the shitty heims anyway,

merci mon homme!

as the post topic states i need some measurements so i can go about building my swinger, mabye ill have a few others made up as well and give some for cheap. i need the tube id and od od the pivot piece, and the carrier end piece. thanks!

the hardware store tubing is good enough. (shit with the weave nylon inside?) but it does wear out. it will get brittle after a while as well as stain. but shit, that happens. get some of it and use it! KEEP IN MIND that you might as well replace it every yearbecause it doesnt have the rubbery make up that normal rad hose has. or you can go to a performance shop and buy some lengths o stainless braided rad hose. you can also get the stainless braided stuff that is coated as well.

the hardware store tubing is good enough. (shit with the weave nylon inside?) but it does wear out. it will get brittle after a while as well as stain. but shit, that happens. get some of it and use it! KEEP IN MIND that you might as well replace it every yearbecause it doesnt have the rubbery make up that normal rad hose has. or you can go to a performance shop and buy some lengths o stainless braided rad hose. you can also get the stainless braided stuff that is coated as well.

i have the same thing goin on with my bone. while your at it, drill 2 or 3 holes in your pivot bolt and tap some grease titties into the ends

the swingys are roundhouse correct? standard link? pm me dude i might get one across the border. thanks!

holy tabarnacle, exactly as hilarious said haha. your going to look for any semi-gel type canned paint stripper (talstrip, lepage polystrip, general) warm day, pour it on and move it around like spackle or shit with a paintbrush. you can cover it or wrape it up in a tarp to keep it moist (the stripper will dry out in sunlight, or a slight breeze) after id say 10 minutes,flip it over and spackle some of the dripped off stuff on the other side, touch up around the sides. wrap. 10 minutes later, varsol is great for washing off the shit at this point (you can also use your garden hose be careful with the pressure). use a basin and pour it all over. this is to remove allllllll of that loose paint and the chemical. follow up to the varsol wash with blowing it out BE CAREFUL WITH COMPRESSED AIR!!!!!!! wash again with water from your garden hose. send to keil for polishing! *also remember to remove the rubber dampers because varsol and strip will eat them. definitley to remember to flush out the rad with clean cold water as well. very thoroughly! all of this can be done for about $30 worth of proper materials (at least a liter of stripper and 4l can on clean varsol) and about an hour of your time with great results. i definitley suggest using some sort of basin to work in, a tarp will do fine to cover the basin, wrap a bugee around it to seal it!

as a friend, i give you credit bud, those are the statents that will make him better faster haha, glad you can have a laugh over the issue. i noticed right off you mentioned him before the bike and thats the best buddy (with a fast bike) you can have :cool: get that motherfucker on HQ, a good dump is all you need to really appreciate these machines, now he needs to be educated on building his own death trap/moneypit! i cracked a helment on a gravel road and "snored" myself, its enlightening.

yall ever see the clear engine cases made outa hardened plastic?

that is a stock rad he stripped, and dam it looks good. its a really easy thing to do, the stripper really is bad ass man haha i was going to do a right proper how to but it worked so quick i never had time to stop!

id like to mention you fuckers over in europe haha (its a joke no gangster here) you guys have the sickest streetin bikes i have ever laid eyes on. i only DREAM of getting away with that here. ride on partner :cool:

im going to strip my rad here shortly, ill be posting pics of how its done and the suggested prep. check back later tonight.

ratbikes are sick, im surprised i dont see bedliner used more often haha. i suppose my shee is a ratty theme since im so poor lol. "what its got is ALL its got"

no. actually a lack thereof.... ill creep the site daily you know it. when you see a pic in this thread of the ass end of a pickup truck, you know the damage is done...

haha no problem! remember, its not only idiots that ask dumb questions. and a dumb question is one that is not answered. share your knowledge thats what the sites about. id also like to take a momento thank the guys whoce helped me along even tho im just selling it.... when i return my ass to a banshee noone knows. ill be moving to ottawa in 3 months, the most you guys are gonnasee me post will be pictures of downtown ottawa pocketbiking. haha so ya, thanks guys.

well. i got a line on someone building a drag bike so it might be totally sold for $600. im so fucking outtahere and gone now i cant wait for the cash in hand.....