mesa banshee

this thing sucks... anyone know a good shop in AZ

Very Black thanks thats way high I was running 350 jets witha 4mil ported eng on the stock carbs If u are running the pods filter that hook up to the carb u should be around 300-320 Just removed the cover of the airbox I would say 290 or 300 The elevation and temp also plays a roll in jetting For temp. When it is cold u go up a size on the main jet ... Warmer down a size Goin 2 higher elev. Drop a size.. Goin to lower elev go up one size If it is hard 2 start change your ngk plugs. Ibet they are blacked out and soaked with the fuel mixture

so its too rich?

runs great up top

even with 350 mains

fmf fattys 27.5 pilots and currently have 350 mains 040 over stock K&N filter No airbox lid 125 psi 2100ft 70degrees HARD TO START

Anyone else have any opinions? ken

hard to start

fmf fattys 27.5 pilots and currently have 350 mains 040 over stock K&N No airbox lid 145 psi 2100ft

1987 banshee. was going to compltely redo. Has many new or after market parts, just lost interest. I don't need to sell but someone else might as well have fun. Also have newly powder coated frame that is included along with 2005 banshee red front shocks and an extra set of carbs and extra wire harness. Please ask any questions. Carbs are jetted for 5000 feet, need to be changed for phoenix. Seat cover needs to be attached. Please ask any questions. 10 HRS new pistons that are 65mm which is .040 over stock mildly ported head was milled Ken http://phoenix.craigslist.org/evl/mcy/877435412.html

Let me know how much

Milled head 145psi Mild port, air box lid off 95 degrees thanks Ken

I am at 2000 ft, fattys and K&N .40 over any help would be apprciated

still have? ken also thanks for the axle... awsome

still have j-arms?

Still have axle? if so I can paypal you right now ken

still have axle?

Any pics?

how much?

still have axle? Pics? ken Mesa AZ

looking for red 87, see you have bunches on ebay. ken

have pics? [email protected] Ken

look for front stock banshee rims gold,excellent to "mint condition" let me know if anyone has any they want to sell ken

sold? if not pics? ken

how much for carsb