bbcmudtruck

I will not accept a refund, My bad Ryan

Well shit. I guess I still need some sprockets.

I agree, do something different. I don't remember where I saw them, but someone cut the top flat part off of the front fenders leaving some "wings" but they cut flames into the wings! Does any of that make sense? Heres mine, I pointed where the flames were.

I got an oring chain and sprockets, thanks to "theshee", I still need; Rear caliper, and pads swingarm K&N filter I have some paddle tires I could trade, otherwise the cheaper the better! Thanks Ryan

I feel like such a douche for hauling ass around trails I wasn't familiar with. However, this is the rides of shame forum! Maybe I could have made if I had some dixie horns?

How much does it lower it? Can you use it with after market +2+1 arms?

I appriciate the info nyuk. Where at on the pivot tube does the zerk need to be? Obviously where I can reach it, but is there prefered placement? As far as bending the swinger, I think its just bent where the bearing carier bolts up to it. I didnt want to try and bend back into shape, thinking that it would just happen again. Also, do you have any chain tensioners? Mine are getting a little ugly.

I am putting on a new stock swing arm. What all do I need for bearings, seals etc. Who has the kit I need. Also is there some way to gusset or reinforce a stock swinger? Thanks guys Ryan

This is a pure example of Awesome camaraderie. Banshee BrotherHood :beer:

How much for the stock wheels picked up?

If you have a rear caliper, send price shipped! thanks Ryan

PB works good, however Aero Kroil is the best. It is a little expensive, but man it does wonders. Hit it with some Aero Kroil and let it sit for awhile, and repeat. Then weld a nut to the stud, but I wouldnt weld it at the very top, try at least half way down the stud. If this fails you need to bite the bullet and take it to a machine shop. They shouldnt charge very much anyway.

Thank you, but looking for a better deal! It doesnt have to be show quality, it just needs to be in good working condition. Ryan

How much shipped?

I will take it if its an O-ring chain. Thanks Ryan

Is it an O-ring chain?

I need the following, Rear brake caliper, and pads Swing arm rebuild kit, bushings, seals, caps, etc... Rear shock mount bushings and seals, Oring chain and sprokets, for stock length swinger, New K&N filter, & Patience, Im ready to light it on fire! Thanks, Ryan

Nice set of sand sharks, 20x11-8. I need the following and will trade accordingly: Rear brake caliper, Rear brake pads, O-ring chain for stock swinger, New sprokets, Swing arm rebuild kit, New K&N filter, Nice 9" set of rear wheels, Seat cover, white and blue or some combo of those White plastic, Nice grill, not a stock one! Thanks guys.

I have a blue 01 fmf fattys, ported and polished, welded crank, boysen carbon fiber reeds, +2+1 a arms, brand new works dual rate shocks, I am located in Missouri as well.

Sounds like "another friend" is in for a good show :yes: I think that I'm going to rent some shoes down there. What kind of deals do they have? Do they rent with wheels also?

I dont think I got it shut down while in the air, but probably right when I hit the water. I dont think that it tore anything up though.

Well there I was.. Riding in a new area with some guys at their track. They have a bunch of trails that go in and out of a small patch of timber. Almost of the trails that lead out of the timber are hills that you can jump. I got a brand new set of works shocks just installed, so naturally I wanted to try them out. I followed them for about ten minutes going from one jump to the next. Well one of the guys got ahead of me a little ways, so I tried to catch up going around this corner that leads up a hill. I hammered down in second gear with out knowing that I was hauling ass up a pond bank. At the top of this very steep, and very large hill there is a corner, that I watched go by. The guys that were already out of the timber and on the other side of this pond by now, got to see a dam good show. They said that they have never seen anyone jump that high and that far on a fourwheeler before. I landed half way out across this pond. I dont know how, but something told me to shut it off while in flight, and I actually managed to get this done. I got off in disbelief and swam it back to the pond bank. I drained all the fluids, cleand and drained the carbs and raced it at the horseshoe drags yesterday. They said that two other guys have done the same dam thing. The new shocks work great in the water, it felt like a cloud of air!

I have a purple peaople eater and a purple headed yogurt slinger if you would like to know how those work.

How do you like your eggs in the morning? Fertilized? You wanna go halves on a bastard? I think about you when I masturbate! Excuse me, does this smell like chloroform to you?

Thank you MarineNYC for posting a very worth while thread. Amen. Sgt Hartley, 2nd Engineer Battalion Sappers lead the way