[help with gearing]

Am I just getting old and blind...or is there no motor specs in his sig??

my bad thought it was in there my specs are vitos 4 mill stroker crank stock rod length 80 over vitos super stock pistons toomy t 5's 34 mm keighn pj's 5 degree advanced timing dyno porting mild trail lightend flywheel my tires are douglas blue label backs with 18.9.5 8 turf tamers with 2=2 proline a arms with 19.6.10 hole shots on douglas red label rims

[help with gearing]

my motor is in my sig n yes im trying to go faster not slower the gears just dont seem tall enough but was just wondering what to change the back or the front

[help with gearing]

well ive got a 14 41 set up n im thinking my motor is to much for this set up should i go to 15,16 on front or go to a smaller back thanx

[vitos 4 mill stroker crank]

no but if thats what is well hope so if its not then its back to the drawing board again

[vitos 4 mill stroker crank]

no im getting tired of tearing it down but that was my guess also so im waiting on my clutch from the shop took it there last week to get new cushions put in but even with the clutch of the thing still has some chatter dont know if its piston slap or bearings just bought the crank went through the warm up cycles and one ride about an hour then the next day started hearing the noise

[vitos 4 mill stroker crank]

brand new vitos crank and 80 over pistons hearing chatter behind waterpump cant figure it out i cant find anny thing wrong with the crank but something in there is making a hell of a noise ive tore this thing down like 6 or 8 times and cant figure it out