lt250rfd

have a set of stock gold rims. the edges are dinged up a bit, also have 2 other stock fronts.

hey cah is that an after market setup?

thanks for the info. was going to loctite it but will probally pull the clutch and double check everything since the cover will be off again. a few people i've talk to thought it could be the bearing inside, not sure though. i will have to tear into it when i get back from jamaica next week.

keep losing the jam nut (backs off) on clutch push rod (don't have the manual in front of me i believe its push rod) center cable adjuster on clutch. lose all tension on clutch cable. nothing appears to be stripped only pulled cover to put back on after finding. rode for a few minutes now back where i started. backed off again. any help will be appreciated. thanks

hey i'm still interested. i'll give you $1100.00 cash if you meet me around madison.

can u send me some pics to [email protected] thanks

hey thanks alot methman

both front and back, neither will fit my banshee, haven't tried the blaster. was told they were for trx 250r. im in th same boat, i got a bunch of parts from a guy that had banshees and 250rs

have some rims laying around, was told there trx250r, but im not sure what the pattern is suppose to be other then 4 bolt. if anyone has it thanks in advance

ive tried searching topics but keep getting nothing to come up

new to banshees and in process of putting one together. put a rebuilt motor in that i came across and fired it up. runs but i get a sqeualing noise from the clutch? goes away when i pull the clutch lever. does anyone have any tips on what to do or check? motor is all lubed to specs, have clymers but haven't been able to read through thoroughly. was wondering if anyone has ever had the same problem? thanks

hey thanks but i found a complete set on ebay. if i would have remembered i had another set of carbs with the idle screws already installed just needed the caps. oh well guess thats what i get for not cleaning the garage sooner.

got to have extra funds for that and work is slow for me right now need to conserve

good looking ride if i wasn't building one i'd be interested

thanks got it to work i just didn't have the dashes in the store name

do you have the store name or item #? tried looking up and no luck.

Hey thanks ill look it up. was on there the other day and saw a few but never got any reply from questions i had asked about the kit. thanks again

scuba steve wassssup

hey thanks ill look in to it

want to know where i can find a full tors removal kit. looked around on the web and everthing is partial kits has this but need that etc... any info or links? thanks

what year is this stuff from?

was looking for a 96 or newer harness thanks for your time though

what year is the harness from? any splices or repairs? shipped to 60436?

any splices to the wiring harness? any other electrics with that or just the harness? how much to 60436? paypal?

what are you looking to get for the nerf bars? any damage to them?