banshee_boy09

I want to do the same thing, I was just going to use regular cylinders tho, and im interested in wheelies.

Sorry guys I will try to sell this stuff, I went camping lastnight by this little creek and couldnt go to sleep, and i finially did, I woke up hearing someone screaming and a light shining n my face from the mirror, i look out and water is all around me and my buddies S10 has water like half way up the tailgate, my banshee is sitting there with two tires in the water and the water is rushing around big time, huge waves, and he jumped into some bushes to get out of the current and got over to my truck and then we formed like a human chain hanging onto each other and got over to some dirt, no cell phone signal on at&t or alltel, this is 5 a.m this morning, me and him picked my banshee up and put it in the back of my truck, and managed to get 3 ratchet straps onto it, and we left, i came back about 45 mins later hoping my truck and banshee are still there and get there my buddies truck is gone, it pulled it off into the water and my lifted chevy has water going over the hood, its a 92 4x4 with a pro comp 6in suspension lift, and 33 inch tall tires, i called a wrecker and they said its 200-250 yards out in the water, and they cant reach it, its a steep little trail about a mile long just to get down close to the river. Im back on campus at the dorm now, hoping the water goes down, I just finished my banshee before i brought it up here, and I only have liability on my truck, im still freaking out to say the least, thank god right before we came back the water was coming down slowly, i could see my passenger side headlight finially. But now a friend that lives out about 5 miles from there says its raining again!

Frame has no title, its in Campbell MO. The frame has a cut on the subframe brace, on the left side, no clue why its like that.

Here are some pics of the bike the parts are coming off off, The wheels and tires are not for sale. Ive got alota other stuff too, The engine cases are just some that Ive had for a while, They are in excellent shape, no cracks of any kind whatsoever. Thanks!

Anyone??? I need to get rid of this stuff, Ive got a roller frame with everything pretty much.

Here are some cylinders ive got laying around the shop, had a 'cleanup' port on the intake it looks like. These are probably going to have to be resleeved. Ive got paypal, 100$ shipped? Ive also got stock reeds in good shape and intake boots for stock carbs. Lemme know! Thanks Ive also got an almost complete banshee that I can part out, so If you need anything let me know.

lol, is it me? or does it seem that 'StreachedBanshee' is trying to get an argument started with 'how the stuff works since u apparently dont know how it does' and with 'See u in 5 years when u get it done.'

Any progress???

A stock banshee will easily go over 65.

Hows it comin? Any progress???

I did the same....and ive put ALOT of hard hours on mine...but I basically just have minor mods tho...I also bought a clutch kit from rjatv.....awesome clutch!!!!!!!!! IMO....

but wouldnt shipping be really expensive for just one way?

I guess I can go with t5's or t6's but does anyone have a shiny chrome set like my cpi's?

I really really wish I could, but im leaving for college in about 15 days, and I have no extra money whatsoever.

Im really looking for some t-6's and they are small bore pipes. Thanks!

I bought these cpi's off of ebay and shouldve done some research about them first off im not ported so thats why im wanting to get the t6's but some of the chrome has flaked off ( in the pics ). Just let me know what you got, other than the rust there are a few little dings on the silencers from repacking them a while back. Thanks!

Ok, everything looks to be fine with the clutch.. The rattle is pretty loud, quite a bit louder than it was ever before. But it does stop most of the time when you pull in the clutch, its definately not the kickstarter...or atleast the outside part isnt rattling.

I just got my banshee put back together and it done fine for a little bit, but after about 5-10 mins of riding it then I started hearing a rattling, the rattle is coming directly from underneath the clutch cover I pulled the cover off because it sounds like a stock basket that is really wore out. But I have a billet basket in it now with a new clutch pack, idk what it is, and it will do it pretty bad when it is sitting in neutral idleing but pull the clutch in, ....or put it in first gear then it will stop rattling any ideas will be greatly appreated, Thanks. Ohh and there is not slack between the gear and the basket.

With the lid off it runs a little better but I like how it sounds and runs with the lid on, with the lid off it dont run any different doing wheelies. The float height is what I was thinking might be causing it. I may try to set it different.

No, it starts, runs fast and slow fine..but if I do a wheelie and try to just roll in 1st gear..or maybe 2nd steadily then it will load up really bad. Does my float height need to be set differently? The banshees on youtube dont bog like mine does.

My banshee has stock carbs and pro circuit pipes, stock air box and pro flow adapter, 270 mains, and I dont remember the needle setting or pilot atm,..but when I try to ride a really slow wheelie by balancing it in like 2nd gear or w/e then i can keep the front wheels up for like....a couple seconds going slow and then it will bog down reallllly bad and you cant get it to start pulling again..until you let the front end down and clear it out again..I couldnt ask for the bike to run any better as far as starting and just riding it, and like if I pull a wheelie in say 3rd gear and rev it and shift, it does pretty good...it dont bog much at all. but the guys on youtube I see riding wheelies on there their bikes dont even come close to bogging like mine does..and i dont notice that theirs dumps fuel out real bad after doing a wheelie. Any advice will be greatly appreciated. Thanks!!

I was just gonna see if any of you guys had a wood or synthetic stock and pump for an 870 express, I have paypal, Thanks.

If you have any questions just hit me up and ill get right back with you. http://cgi.ebay.com/Traxxas-Jato-3-3_W0QQi...93%3A6|294%3A50

How about the vitos forged power piston, Arnt these wiseco pistons? That have been modded or something by vitos, I like that the wrist pin bearing comes with it. http://cgi.ebay.com/ebaymotors/YAMAHA-BANS...sQ5fAccessories

Has anyone used these yet? I am in the process of overhauling my banshee and the funds are VERY tight to say the least, Ive been running wiseco pro lites but seems like just the pistons, rings, pins, and circlips are 185$ plus 12.99$ shipping from rj atv. What do you guys think ?