magunit420

PJ67RA1MJ numbers on bowl oh yeah did i get a good deal on this? for 2500 well a little more after taxes and back registration but it came wthe t5s, pro designs coolhead, the carbs and it being ported and bored, runs great and starts on first kick plus the new paddles on chrome. The only thing ive had wrong is the spark issue but i got that hashed out.

the numbers are PJ 67 RA 1 MJ And yes i would love to get hooked up on a 421 cub would be just right for me i basicly just ride the dunes. But how much would it be out the door with a cub kit and is this something i can install myself? I could handle a cub no problem i was just messin around in the woods and goin too fast and almost run into a tree wheelyin it was very scary i had to reach for my backup underware for times like that where you just take a big ole fat poop and thank god ur alive.

34mm?

Hi i bought this bike off a friend who put like 10 gs into (including bike) he needed the money bad so i offerd him 2500 for it with a set of chormers with new 10 paddles and razors up front along with extra gas tank box of odds and ends and 2 new sweet gas cans. he took it well he need bailed outta jail so he had no choice well hes now in prison and i do not talk to him. Im just wondering what kinda setup this bike has. He only used it in the sand and ive seen this bike and its scary fast. I just wanna look into cub kits or what not but i need to no whats it already have done to the engine iknow its ported and bored but not sure what kind of port and how much its bored Its got t5s and thats about how much i know about it besides i already almost killed myself on it twice please help

Yeah i got nothing threw the secondary lead but threw the primary i got resistance. Im just bored and want to get my bike running....the neighbor hood has been way to quite with my bike outta commision so i got a coil commin in the mail so i hope it works.....i appriciate the help and hopefully it aint the CDI

I got a ohm meter and tested the coil as under the clymers. i got resisitance on the first test threw the primary wire. but on the secondary test threw the spark plug wire i got nothing. so is this a short circut or what? oi sthis my problem why i have no spark being the stator is new and all the wires look good...im not to familer with the terms and stuff as i have fried my brain with marijuana.

I got a ohm meter and tested the coil as under the clymers. i got resisitance on the first test threw the primary wire. but on the secondary test threw the spark plug wire i got nothing. so is this a short circut or what? oi sthis my problem why i have no spark being the stator is new and all the wires look good...im not to familer with the terms and stuff as i have fried my brain with marijuana.

DOES ANYONE HAVE A COIL FOR LIKE 25BUCKS SHIPPED IM BROKED

its got spark right? is this the email 4 paypal?

i need a good uised coil that you know works

do you have a coil for really chjeap? email me at [email protected]

yeah i need another meter and yes i have the gap set on the pickup i heard the lid of a matchbook if you dont have a gauge but how would i replace the burned wire just cut it off at the burn and rewire froom there or replace the whole wire?

yeah i still have nospark on my 95 after it quit running all of a sudden i pulled the cover off and the pickup was broke so replaced stator and still nothing. i looked over wiring and noiced the primary positive was really loose on the coil so i pluged it in and no spark so i noticed on the positive wire(orange) there is a spot on the wire that looks like got melted and exposed the wire like maybe the size of a pea. could this be my problem? to cheap to buy another multi meter c ause i broke my last one cursing and throwing things

yeah one other question.....how do use the multi meter.....like what setting do i put it on? and where do i put the pos and neg to check the pickup and stator and cdi? do i disconnect the wires and put the pos and neg into them and kick? or what the manual doesnt explain to good 4me to understand......im just a newb with a broken banshee still.

yyeah i know where to buym but i already bought one and it didnt fit. so i need to find the RIGHT size and i dont no...... the one i got was one size to small i believe.

High i need to find a flywheel puller and im not sure what thread size and pattern. is M27 X P1.0L correct? for my 95 banshee

What isthe purpoes of 2 into 1 carbs over 2 carbs at a time? sounds like it would be lesser power?

cdi maybe? running it cold have sometrhing to do with somethingt? i lether warm up everytime but the last ride i was drinkn a little well alot of wild turkey and shown off i coudlnt wait for it to warm....so i choked it and let it run like 30 seconds and took off....im dumb iknow and drunk

as in the pick-up (not the coil) just the top of the pickup is broken and the magnet and a few copper wires inside the pickup is broke and some wear on the magnet from the 2 magnets on the flywheel.....from looks it rubbed on the flywheel a little...man i dont no im so pissed though i dunno to replace the hole setup or just fix the pickup. cause whatever or however the pickup got broke it may be in the flywheel?

No it wont run at all no spark and the top part of the pickup coil is busted and the magnet inside is also exposed and it looks like it rubbed on the 2 raised spots on the flywheel. im just trying to figure it out ya no if that can cause me not to have any spark so i can quit stressing a little bit....i got a new pickup coil on its way but.....im just curious if that is forsure what is wrong or if anyone else had the same problem.....ive heard of guys busting there coil right off and of course youll have no spark after that. Im just nervous is all shes my baby and i love her and i wish she was better so i could ride.

oh yeah and the gap is good

ic.... well then i dont no it was running tits and took off and hit powerban in 1nd and started to shift into 2nd and it putterd out could i have blow it up? i dunno its got no spark the wires are good the plugs are like new. Just when i pulled the cover off and the pickup wqas broke. So i guess i need to fixthat then try it and hope it works.....im still a newbie....ive only had this bike a couple months not to familer i do have a Clymer and it says in the trouble shooting index that no spark my have something to do with the magneto or pickup coil? i need to ride bad

yeah i got a question....yesterday i started my 95 up and rode it like 5 seconds and putterd out.....so i roll it back into the shop check the spark there was none....so next i pulled the magneto cover and on the pickup coil a little piece of plastic right on the corner was chipped and the coil was exposed. Also the copper wiring inside a few strands was damaged. Is this why i have no spark? should i replace just the pickup or the hole thing? just because i dont no why it broke in the first place. so im thinking it might have to do with the stator coils or something like caused it.....? i need help in a very sad way:(