Ron Burgandy

What does that do?

. I also have super stock Rees pedals. I had 25's with 270 mains with needle in stock positions and I changed to 290's with 30 mains and that didn't really affect the bog so I brought it back to 25's and put needle in riches position/ clip in lowest point. It's a stock needle and I don't see air leak etc. how to you think it's running?? (I just want to get rid of the bog)

I've been reading the hell out of thr forums etc for about two weeks and tuning my bike recently. My bike has always ran the way it is now but I'm not sure if it's right or not? I've changed the jets and the needle positions, air screw etc. and it literally seems like it doesnt do much. No obvious air leaks etc but if I can send a video via email or text and can help that be amazing! My mods are fmf exhaust with 2into1 k&n no air box, advanced timing +5, coolhead compression 155 with pump gas 93 40:1 premix using 925. I'm also at 5000 ft elevation. Pm Me if u can help I think I may need to put new cylinders in? As far as that goes I'm not sure? That's what I'm trying to figure out. The bike runs good and has been reliable for the past 5-6 years I've had it but has always been off to me jetting wise or seems rather quiet w/ no pop. Opinions greatly appreciated. I think if I can send a video and someone can watch it to help to say what they think it is. Simple and quick is all it could be thanks

Ya I wouldn't trade in my vforce3 for 4's but if its true I still ave stock reeds so I'll be ordering them as soon as I know it's the real deal

Anyone see or heard about these?

I didn't set any gap on my flywheel when I installed my timming plate. What kinda problem am I gonna see? I asked a few days ago on the timing plate stikky already but no reply Thanks

Do u think there's a diference in how high the pipes rev? One maybe reves to 9thousand the other 10 maybe

I just did mine, BUT I dont remember seeing any KEY your talking about AND i didnt set the gap or whatever for the fly wheel... am I gonna have any problems since I didnt set the gap thing. Just wondering before I go out hitting the trails this weekend

Droped mine on my cement floor on accident and just put mine on tonight, billet sounds like a waste of money to me but that's just me

I have a set of the aerospeeds, I like mine but I haven't really got to run any different paddles either. I didn't see nothing wrong with them though seem to be apretty good paddle tire.

20 minutes of idling is a LONG fooking time

nobody runs Itp hd's? Everyone I ride with runs those, front and back. I love mine they in my opinion are the best looking trail tire and hook up very well.

Between cutting your fenders and the hjc motorcycle helmet you will be as aerodynamic as can be.. You'll need a seventh gear with that

You don't need plastics.... cuts down on the drag. Consider how much mpg you would be wasting, and speed.

I saw that on ebay too lmao, I figured it was booty and wouldnt even fit but it actually looks alright

Ya what HE ^ said. perfectly said

Dibs on GYTR Front, PICS?

Tires ! If you dont have a good set of tires, I would most definatly get some. Most people overlook this...

-my .02 cents on the YFZ Shocks... I weigh about 170, and I think the yfz shocks are setup for someone 200+. Their pretty stiff even when put to their softest setting. -Now I put on a pair of Work's shocks that were setup for someone around my weight and THATS when I could feel the difference in riding. Much better. Im absorbing alot more then I was. Big Big difference. -I just dont want someone, like me, to go buy they yfz shocks that arent setup for someone my weight.....

-Santaclaus for grownups. Easiest way put.

I got the shocks on! 240 shipped, not a bad investment...I should of took gimmeabeers advice and take off the springs for fitting, looks hella good. Now all I have to do is adjust them and see how they roll

I got the shocks on! 240 shipped, not a bad investment...I should of took gimmeabeers advice and take off the springs for fitting, looks hella good. Now all I have to do is adjust them and see how they roll

I dont mind my friends riding it, most of them are too scared to get out of first. One of my ladie friends fell of it and got alittle bruised up and I thank the big guy all the time that it wasnt my bike that got hurt :thumbsup: