BaNsHeeJuNkEy

Hey whats up looking for a new frame for my shee. mine is a little beat and will ba way to much work for me to fix. because i can not weld. if anyone has a frame in mint shap would be great if it has scratches i don't care or little dents not that big of deal. but looking for someone close to were i live. willing to drive a little.

you say you have pics. please if you would send me them i started cuttign away already at the front. i need to get this thing in tip top shape. so i can go ride again. also is there a speacil tool needed for the from steariong steam. u pulled the steam out becaus eit needs new bearings or something because it would pull in and out. but i don't know how to get the bearing that is in the out.

ok kool then they are going since i have a different air box. anything elsa i can cut off on this thing i want to make it light as posable. also i have a question does it matter if i shortn all the wires on the shee and put everything more so to the front of the bike. that was there is less wires. adn can i do the same for teh over flow bottle. or does the over flow not able to be below the radiator.

Ok i just took my hole shee apart today. i am going to sand blast the hole thing and clean it up i know there are some mounts that i can get rid of. but not sure what one they all are. i know the brake line ones i can but there is a bunch all over the bike taht i haev no clue what they are for. like under the seat i have 2 brakets one on each side and have a peace of metal sticking out with ribber on them and they are not doing anything. can someone help me out on what one to get rid of. aslo once i got the hole bike striped i saw that the back of the bike has a broken peace wear the two parts of the computer were. and it looks a little twisted. and my right foot peg the rear bolt on it to teh frame is rotted/rippped right out. am i better off fixing this or gettign a new frame. and if so anyone have one for sell close ot mass and cheap. i have a 03 shee.

ok i have been running gold spectrum 50/1 in my bike with 104 octan. wanted to knwo a few things. am i better off running klots technoplates or stayn with what i am using. also am i better off running 42/1 instead 50/1 on my bike. i do a lot of trail ridin, racing every now and then and lots of jumps and wheelies. and i would also like you opinnion on motor or for my quad. it is a 03 shee. i know not to use synthetic because it will make clutch slip. what what is a good oil to use. and a shee take 10w/30 right.

Hey i am also looking to buy some new tires my self the hd's are kind of heavy don't know if that matters to you. but i have been looking at the xc's in 20x10x9 for back and 21x7x10 in the front and i do a lot of trail ridin my self. along with a little of everything elsa. but if that is all you are doing i would go with the Gncc's. they seem to be like the best two choices. any other op on these along with the one i added.

pm sent.

I don't let anyone ride my shee not even family. let my brother ride it he brakes shit and never fixes it wtf. me and me only.

Here are some i have been doign some reading my self. http://www.trickracing1.com/home.html http://www.planetsand.com/ubbthreads/ubbthreads.php and here is a vid of a turbno banshee. http://media.putfile.com/turbo-Banshee

I agree it is all prefrince on what you like. speaking of tors. i just got my banshee not to long ago and the guy before me removed it. But i noticed that some wires were undone under my gas tank. 2 of them go to 2 big metal things on the top of my carbs and are not pluged in. what do i have to do to remove them. because i am looking inot some new crabs for my bike. but not sure what ones to go with or what company. thinking 33-35mm carbs. any help would be great.

i like your project keep it up looks nice. and what are you running for a turbo? looks like a t25 from a eclipse or a audi. well it looks like i am going to be rebuilding my motor anyway now. i wenty ridin today and one of my carbs got stuck wide open. adn from that time till i shut it off with in like 2-3 sec my piston rings let go on the right side to. but looks like i will have to turbo it later when it is running again.

thanks you guys have been a lot of help. i know a lot about turbos. i had a 9sec dsm awd turbo and loved it. i am going to make some phone calles adn see what they say and what they come up with.i am going to do all the work myself so that is not that bad. but 2-3g's for all that is nuts for quads. and that vid is sick.

ok i will have to do a little more looking.to see if i realy want ot do this or not.

Hey whats up i want to start to rebuild my motor and set it up for some jucie or boost. i have done some looking but haven't seen anything on a 2 stroke or any quad with turbo. any info will help.

Thanks i will have to look into that. because the littlest bit of water gets up in there no matter what amount i go through.

Hello everyone, i just got a 03 Banshee and i love it. Well the guy i got it from has done some work to it. But the air box he put on it lets water in so easy. there was a peace of something over the top he said that stoped water from getting in. i want to make something for it but don't know what i can use that wont let water inside but let a lot of air. here is a pic of what it looks like any ideas are welcome. Thank you Erik