Wheel_Works

I here ya. I might just do that.

I put the bike back together yesterday. Started 1st kick.

I'm in Mid-Michigan. I have to dig the bike out of the back of my garage this weekend and I'll take some more pictures.

I have a 1996 Yamaha Banshee. I put everything in a Lightened 89 J-Arm frame(needs Powdercoat). New 12.5" Marvin shaw shocks on the front and a R-1 shock in the rear, +6 swingarm and Stainless braided rear brake line, New chain and sprockets, Plastic is race cut and a stainless grill has been installed, custon seat cover installed, Skat-trak Mohawks on Douglas wheels, New 20X10X8 Skattrak 8 paddle Extremes on Douglas wheels, Aluminum Cascade Handle bars and new Pro design Teather switch, Set up with twist throttle. Wiring harness is as simple as it gets-3 wires. Cdi box is under the radiator in the front. The motor was completely built by Dan Hull @ A&S Racing. The top end is off the motor and motor is out of bike(Fresh Bore and pistons By Dan also). Stage 3 plus port work, Cut head for race fuel, R-1 clutch kit and roller clutch bearings, Shift-star and shift drum mod, Crank is rebuilt, new crank bearings and trued and welded, All new seals, Billet timing plate, lightnened flywheel, V-Force 2 Reeds, Carbs are bored to 27.5mm, Also have a fresh set of A&S Alcohol carbs, New K+N filters. CPI inframe drag pipes/Sparkies. Bike ran 5.13 in 300 ft with stock carbs No trades and $2000.00 Firm Bike is in Mid-Michigan Call or email me HERE I don't get on here much anymore. (989)701-0238 Rich

Unless you have his cell phone number. It's well worth the wait for his work. I've know Dan since way before he was A&S. When he told me he was quiting his job and opening a Banshee shop I thought he was crazy. He proved me wrong, a few other people also. As long as I've known him, I still have to wait for my stuff.

Dan did both of these for me. The head is cut for Alcohol. It's fresh and had no run time on it. $100.00 shipped Stock carbs Dan converted for me. New floats, needle and seats, pilot and mains, air screws, gaskets etc... You will also get the needles and floats he did for me also. I haven't ran them since they were done and everything was new. I do have a identical set on my bike and they work very well. $125.00 shipped undefined

What brand is the +4 over round house do you have pics? I think he's Checkered Flag Motorsports from ebay. I've bought several of these swingers and noproblem with any of them.

$200.00 shipped to your door.

TTT

I have a Stock banshee head that Dan cut and rechabered for Alcohol for me. Hasn't been ran since it was cut. $100.00 shipped I also have a set of stock carbs Dan Converted to Alcohol for me. Everything inside is new, Floats, needle and seats, gaskets, all jets, air screws, etc... They haven't been ran since converted. $125.00 shipped

ON Ebay Click Here

TTT

I may do some trading on this bike..

Thanks, I have shipped A couplke dirt bikes through forwardair.com for $350.00 before. I have a good $2600.00 into this thing.

Sorry posted in the swap section on accident first.. Here

Here

I have a set of Toomey t6's with the jet kit and Air filter setup that only have 3 trips to the dunes on them. No dents, dings, rust or other weird stuff on them. Motors just to big for them now. I would like to get $450.00 out of them or trade for a set of CPI inside or outside the frames. I also have the Sparkeys available which are new also for a extra $125.00 if anybodies interested. [email protected]

OK $100.00 shipped?

How much for the Nerfs and 6 pack Rack?

Looking for a Blaster in Michigan, rolling, running, motors, parts. My son wants to build a Drag Blaster.

I could use a set of Carb, how much? [email protected]

I haven't had a Banshee in almost 10 years. I got the bug for one and went and found a perfect stock 96'. Brought it home and tore it down. Ordered a set of T6's with jet and air filter kit. Called my old buddy Dan Hull and asked about some more mods. He sent me a Timing plate and V-force reeds. He said set the timing at 5'. Motor cranks 120 psi I took this bike over to Silver Lake a Couple weeks ago and were beating built 350 bikes and most 4 strokes. We weren't killing them by any means at all, but we were beating them. This bike will be a 10 mill cub by spring on Meth.