civicfrk1

omg if you lived closer id be all over this. lol

lol. i would tape it to my helmet but then the camera would get sticky. lol.

Ok , so i kinda found another bike i want , and if i get what i want out of the shee , to be enough to get this other bike , then ill sell it .if not , i have no problem keeping it , so dont lowball because ill say no. 2005 Yamaha Banshee Limited Edition Black. Motor:(less than 5 hours on new topend) Mild race port Bored .20 over. Vitos Racing Pistons FMF Fatty pipes with silencers. Boost Bottle. +2 gearing for top speed. Jetted carbs (still in the process of getting it dialed in , itll be good before anyone comes to see it) Other: Kenda's in the front RAZR style tires in the rear all 4 ITP polished wheels Renthal Handlebars Race Cut Fenders Tribal Flame Skull Grill Durablue Extended Axle steel braided brake lines the only flaw: the back fender , i was told that when the Original owner bought it , it fell off a trailer , and they got scratched up a bit. the body is in no way twisted or cracked. Id say i need 3,800 OBO. its somewhat negotiable. This bike was previously owned by BluPits who is a very well known member and she and Jody took care of this bike real well. I am also a freak when it comes to keeping things clean , so this isnt a pile of junk. I traded my 450R for this bike . rode it. rebuilt it, scares the hell outta me sometimes, but i guess i just cant stay away from them 4-strokes . might be open to trades. 450cc class. Here is a vid of it running i took today 2-16-08 bike is located in Lehigh Acres FL.20 mins or less from ft.myers Name's Juan , Cell # (305)431-5844 yeah i am obsessed with taking pics

ok so ill go back to 280 mains. do i leave the air screw at 1.5 turns out??? and as for the idle its REALLY low . holds idle for 3 secs or so but since its so low it just dies out..... if i screw in the idle screws evenly , it shouldnt affect the carb sync , correct?

gumby says rich atvfreestylekid says lean. ummmmmmmmm WHAAA?! lol. i think it IS rich. i pulled the plugs out , and theyre nice and WET , pretty oily lol. im going to go down to 280 mains. im at 300 right now

without the filter and lid it runs perfect. yeah im not riding it like this. i just rode it up my paved road for 2 quick runs and put it away after i made sure it ran good. the carbs are basically sync'd , my mechanic sync'd them last time.i gotta raise the idle though because its really really low. will adjusting the air screw make a differnce??? because it was running fine before..

do you still have TORS on there??? thats what MY problem was lol.

its all disconnected right now. the 2 plugs comin from carbs and the one comin from the box. i took off the airbox LID and the actual air filter . and WOW it fucking runs like a raped ape. lol. what should i do? my air screws are out 1 1/2 turns. im going to buy a K&n

Anyone out there?

ok the idle screws werent in , i was mistaken. theyre basically all the way out. but the knob by the thumb throttle , that holds the cable , was screwed all the way out , so it was pullin the cable like crazy. now it holds idle but barely. n if i give it gas quick when idling it dies. its still getting that power stutter at like 1/2 to full. but i was told that im rich at 300. ill try 280. running Castor 927 @ 32:1. its pretty smokey. lol. how many turns out should the air screw be? i did a comp check again and im at 120 each side so that hasnt changed lol. any suggestions appreciated . im happy to have my bike somewhat running again. i still havent had a chance to fully enjoy my new topend

picked up my bike from the mech without him doin anythin. . i told him i was going to hold off on it for now. it wasnt getting any spark to it. he disconnected the 3 TORS plugs , and it started right up. when he sync'd the carbs , he did it with the idle screws and theyre all the way in I THINK. i start it up and it starts revving up on its own. could i go adjusting the idle little by little turning each idle knob the same amount each time and have it NOT rev as high? could there be something ELSE making it idle this high? its revving at like if it were a bit more than 1/4 throttle close to 1/2 Note: Tors is still there , just disconnected the 2 plugs from carbs and the one by the box.

I picked up my bike . i told him i was going to hold off on it for now. when he sync'd the carbs , he did it with the idle screws and theyre all the way in I THINK. i start it up and it starts revving up on its own. could i go adjusting the idle little by little turning each idle knob the same amount each time and have it NOT rev as high? could there be something ELSE making it idle this high? its revving at like if it were a bit more than 1/4 throttle close to 1/2

single 35mm 432 +45 k n filter +80 labor =575 total stock with tors removal total=408 total 2 dual carbs 35mm or so =501 total those r his prices. im thinkin of just buyin the 2-1 n installin it myself....i know how to

yeah thats exactly what I was thinking.hes really well reccomended for some reason from most of the racers around here.Well im going to tell him that im going to keep it dual carb and that im not doing the 2 into 1 because im planning on selling it once its running good.see if that works

Wont I lose power in topend if i get the 2 into one kit??? or is it still an improvement over stock carbs?

is the TORS being disconnected possibly being the cause for the motor revving up on its own?? im thinkin of just buying the TORS removal kit. givin it to him . and have him put it on my bike and tune it.

any good? my mechanic suggested i get it. im having major carb issues. my TORS was acting up not giving my motor any spark. so he unplugged all of the connectors , and it started up. well it is idling , and all of a sudden starts revving up by itself like crazy.what could that be? he told me id be better off getting the 2 into one because its just that much easier to work on. but i am not going to get it JUST so that itll make HIS job easier , because im 16 n im not made of money. is a 2 into 1 really worth it? could i just stick to my stock carbs and get a TORS removal kit? or should i just buy some pwk 33mm carbs and keep dual carb setup? any advice is appreciated thanks.

ATP is 2 hours from me lol. i called up a good friend of troys , Jeff , hes gonna tune it for me $60 . i gotta drive an hour but fuck it if he does it.hes got a really good reputation and he told me he'll get it dialed in spot on lol.Hes been workin on em forever and he owns 3 drag banshees himself , so he knows what hes doing. and hes a nice guy , when i was buildin my motor , i needed a few studs , and i drove to his house , and he gave them to me for no charge , we did sit there for like an hour or so and chat about banshees , hes a pretty cool guy n seems to know what hes doin. he says its the carb sync.

Once i find a shop i will.

so i decided to wait till today to try it out. i switched the tops from my other nonfunctional carbs onto these. wouldnt start by kick start. had to get my friend to tow me about 10 ft till it turned on. it will not hold idle. barely smokes out the left side . and it varies from left to right with the backfiring. switching the tops , for some reason , does not let it idle . anyone know the stock setting for idle???? why the hell would the tops make this happen? im about to take my TORS off to see if thats the case , which im seriously doubting.

i still have parkin brake and choke tube is on. i dont think its the parking brake system doing that though because usually it doesnt let u rev past a certain point. in 1st n 2nd i can rev all the way through . i cant ride past that because the stuttering

whats average compression?? i have 120 each. on a brand new topend with at the most 5 hours

wow fuck this. i turn the idle knob with a screwdriver and it broke clean off. it broke off so softly that i thought it just popped out of place , and it was a clean cut.. banshee is always broken. No one wants to reply to help. i have spare carbs but i dont know if i can change the top piece , the TORS thing.without having to change the slide and everything. Im gettin real sick of this thing. im about to put it in the front lawn for the garbageman to come pick it up in the morning

well i took the reeds off . they were ok. i cleaned em off just incase . put everythin back together , and still runs the same. im fuckin pissed. and theres no local shops around here except a powersports dealer

I started her up again today. i see today that smoke DOES come out of the left side. i was told that castor 927 doesnt smoke alot , but my right side smokes noticeably and my left side u can barely tell unless u really try to look. i put my hand on the muffler and it gives off a bit of smoke , but if im idling , and i give it some revs and keep revving , every once in a while it spits out a gust of air. now i know my needle is in place. my jets are clean. my head/cylinder is on tight. i have new plugs on there . and i dont THINK TORS is causing this because it doesnt sound like that , could it be my reeds? im probably goin to go check those now