I am going to try going around the lake. they just let all the water out so there should be some good sand.
We also go out by the garingtan bridge .
I also go out west of Caroline.
Hay
I am 10 miles west of Bowden
I have a 98 banshee and my brother has a 83 it 250 dirt bike.
I went riding yesterday and it is still very muddy out there is some good sand from the flood.
I have more friends on dirt bikes
I did a 1 hour search on Google and I could not find any thing for 2-stroke's.
the only things for us mixed gas guys is for Marine boat stuff
But if you do find out make shure to post up with details.
How can it be so bad I move around a lot on a bike Cat walk, Jump, hillclimb
Are the kits for the Banshees so short of throw what it sounds like to me is they are like a light switch (on or off)
Maby I will modify a motocross one
any input
could it be you don't have any power at your ignition source I would wire it in to the head lights and just run with the lights on all the time.
I am assuming this is a motorcycle tack because if it is an automotive one it wont rev high enuf.
do you guys use snowmobile studs or just sharp bolts
I Am going to make my first set and I was thinking 3/8's bolts with big washers
are the snowmobile studs expensive.
Canadian ice is hard.
And don't forget the grate Saskatchewan seal hunt
you guys down east going to the seal hunt?
you should take your Banshees down and run over some hippies
EH
hear this is what i am talking about
about $20
lots of colors and sizes
I knew Id find them
to see more go to
http://www.jcwhitney.com/autoparts/Product...0010307/c-10101
These wont see to much Ice just a lot of hard pack snow and some deep powder.
I suppose sand paddles would work good in the deep stuff or some really aggressive mud tires.
thanks
I was just going to use some 3/8 bolts and big washers and grind the end of the bolt to a point I am not shure how much bolt I should have stiking out past the nut I was thinking about an inch
I have seen them do this in automotive tires it should work for me.
hay
I have seen a temp gage built right in to the rad cap for auto motive applications
I would do a google search
I know I have seen them I just cant remember ware