SDuster11

Needing a Kick Start Lever. Just the lever or the whole assembly. Please help. PM me with something please.

I've been looking for a pair and am starting to go crazy. I can't find them anywhere I look. I am an faithful buyer from rockymountainatv.com seeing as they have most anything related to that type of stuff but when looking through the ITP T-9 or Douglas Red/Blue/Black I don't see anything with getting any type of offset options. The only ones I do find are all used. Where is everyone getting them?

Do you mind me asking who did the port job? I have a set of shearers and LOVE THEM not as good of a chrome finish as the CPI's imho but who cares the top end power they make is addicting.

the switch and key look good how would you like the payment? I do have paypal and personally that is what I prefer. thanks, Dustin As to if the wires should be connected or disconnected to run... In my past experience with a 2 stroke outboard boat motor the switch to kill the motor was a grounded switch. Meaning if the switch were to be disconnected (open circuit) the motor would continue running however when the switch was connected and turned to the off position the electrical spark was grounded therefore killing the motor. Don't know if this applies with the blaster/banshee just thought I would share.

I am interesed in your gey/switch you have would you mind sending me some pics? thanks, Dustin

I am interesed in your gey/switch you have would you mind sending me some pics? thanks, Dustin

Lil brother of mine lost his key to his blaster and I was wandering what would be the best way to get it going again. thought of a couple of options but wanted everyone's input if they have every done this. I can either: 1. Order a new key from yamaha if I gave them alll the info for the bike. 2. Go buy a universal key from the local o'reilleys and wire it in. 3. Buy a new key/switch used from ebay. Are blaster/banshee keys/switches interchangeable? thanks, Dustin

DG Banshee Bumper ITP's with Holeshots going to be moving so I am selling them cheap!

Anybody?

Pics Sent

Carbs are sold. Still have: 10" ITP's with 20x10x10 Maxxix Razr's (75% Tread Life bought in July) $75 10" ITP's with 23x7x10 Holeshot's $150 Racing AC front bumper Make offer!!

I don't know what type of ITP's they are if you tell me what to look for i'll find out though. And these are the only pics I got.

It pulls like a raped ape once it gets in the powerband and is rolling. If other people ride it they're amazed at it but out of the hole it bogs. i'll try adjusting the needle/clip first because I dont' have any spare pilots around. thanks

Would I need to richen or lean the pilots then? thanks

75 for front only make offer for back

10" ITP's with 20x10x10 Maxxix Razr's (75% Tread Life bought in July) 10" ITP's with 23x7x10 Holeshot's Stock Carbs but have the TORS eliminated make offer Racing AC front bumper Best offer takes part

I am running a 14 tooth front gear and when I try to launch in 2nd my bike bogs like crazy. I thought it might be because of the motor set-up and all but convinced a buddy to swap me tires and with his 19x10x9 Holeshot MR4's I was able to launch in 2nd. It still had a slight bog but it was much better. I swapped to a 13 tooth front gear and it helped out alot with accel. but still was having to launch in 1st (with razrs on). So I'm thinking it's the razors becasue they feel much heavier than holeshots. Also I spin the heck out of them on packed sand Other shee's running the MR4's & HD's grip. To fix this I am looking at wheels/tires but have questions about the following: -What are the good and bad of 9" or 10" wheels? - What would be a better setup in terms of capability of launching in 2nd a 9 or 10 wheel? - I seems that alot of people are able to hook up pretty good with either HD's or MR4's what are the pro's or cons? I ride in packed dirt or packed sand. I'm not a big jumper couple a feet is max and that's rare. I like to go fast and straight. I want to launch in second and would like to keep the 14 tooth if possible. I'm sure I'm forgetting something so don't be shy. Thanks!

here's all the pics carbs itp wheels with holeshot XCT tires mounted someone make an offer on the tires i'm gettin tired of lookin at them

email sent

23x7x10 ITP Tires mounted on ITP wheels 75 obo Stock Carbs but have the TORS eliminated make offer Racing AC front bumper make offer

I got a set of stock rear's and itp front's with holeshot's good amount of tread left on the fronts.

Carbs $125 Tires/wheels $95 pushbar all still for sale!! WILL TRADE FOR NICE SET OF REAR ITP's

Assuming your in the continental U.S. $150 shipped. What do u think?

ttt

ITP Holeshot tires 23x7x10 on Stock 10" rims (2) DG Front Racing Style Pushbar (Shamrock looking shape) Stock Carb's w/ T.O.R.S Eliminator kit installed All for sale PM me with questions Pipes are sold