Jump to content

Eazy

Members
 View Profile  See their activity

  • Posts

    77

  • Joined

  • Last visited

 Content Type 

Everything posted by Eazy

  1. Eazy
    Any help with the install?? Is the plate something you bolt on to the quad, or place on it, adjust, and then remove again? What keeps the adjustment "locked?"
  2. Eazy
    From what i've been reading, yes. It will be more noticeable on the low end, more than anything..Some guys say 3-5hp gain..(but i dont know) Ricky Stator has a real nice product and he even sells the flywheel puller that you'll need in the installation.
  3. Eazy
    PM'd ya man
  4. Eazy
    got any pics of them?
  5. Eazy
    Is there a kit for removing the TORS completely off the bike? Something to replace them on top of the carbs or am I retarded? heh
  6. Eazy
    Sounds like I'll end up gettin' a flywheel puller or have something with more experience do it for me,heh.. If not 4*, then what do YOU recommend?? Mods are in my sig, stock compression,head,etc? Run 93 pump gas, mix it 32:1 Klotz, and all that jazz.
  7. Eazy
    Got a pic of the billet flame grill insert?
  8. Eazy
    Just want to say thanks to Jeff for setting me with a killer clutch for the Shee!! I notice a BIG difference on the bottom end, for some reason..I also used all 6 HD springs, and its very tolerable. Install wasn't too bad either
  9. Eazy
    Just wondering what the details were for doin' this job? I know you have to have a flywheel puller, but is there a way to do this job, without a puller?? I have a RS adj. timing plate and I need to get it installed..Any help guys? Tips? I was thinking +4, maybe 5.
  10. Eazy
    I think he'd have a pretty good chance..I was walkin' a CR250F a few weeks ago, on a little "roundy track" and the rider was pretty good..I heard those were supposed to be pretty quick little bikes..but Im not sure.
  11. Eazy
    Thanks guys! Im runnin something like Gold Spectrum 4 Clutch saver...Good/Bad?
  12. Eazy
    Im thinkin' my clutch is starting to slip on me..From what I know its stock, from 00'..What clutch do you guys recommend, new basket, and pressure plate?? What all should I replace? Its not an BIG HP motor, but I want something that will hold up to something like 60-70hp..Anybody? Jeff??
  13. Eazy
    There is a good chance, there wll be a few of us there the 19th or 20th..
  14. Eazy
    Replied..
  15. Eazy
    PM'd ya!
  16. Eazy
    Whats the "buy it now" price on that stock swingarm? come with carrier,etc? I live just north of S.field,IL...about 30 minutes.
  17. Eazy
    Thanks man!
  18. Eazy
    My Shearer pull awesome on top end..Has better top end than T5's.(race a similar shee')
  19. Eazy
    Just wondering how to adjust these screws properly? Anybody?
  20. Eazy
    send pics of the swingarm to [email protected] Interested.
  21. Eazy
    I had the same problem, on the same side..It'd even leak fuel, while running down the road!! It ended up being a bad needle valve/seat in that carb..Now, I just need to tune them...
  22. Eazy
    420 Racing- That'll work man, sums it up pretty well..I know you guys said thats ideal, for bigger HP motors, but would it hurt anything on a say..55hp Shee'??
  23. Eazy

    Rear banshee wheels

    Eazy replied to jankab's topic in Wanted

    I have a set of stock rear rims...if thats what your lookin' for..Can get pics if needed.
  24. Eazy
    Pic of the seat seat cover? [email protected]
  25. Eazy
    Im curious as well....More info about the lock-up clutch.

BHQ Quick Links

×
×
  • Create New...