Jughead

Oops I just realized I posted in the wrong Section.I really Don't have Anything banshee Related to trade on but would Buy for the right Price. Got some Pictures?

Anybody Parting out a Zilla I'm needing a Complete Clutch Cover in good Shape with the Water Pump Assembly and an 88-90 7 Bolt Head.Any help will be greatly Appreciated. :thumb:

I'm needing a set of UFO's for my Suzuki T500.Anybody here have a good used set to sell CHEAP?

Mikunis to a Project I'm working on.Good used ones will work as long as they are Cheap. A set without boost bottle Spigiots are Preferred but I can work around that.

What I mean by the Cut outs Facing the Rear is that with a Twin Especially with Mikunis (I'm not sure About Kiehins) you have a Left and Right Hand Carb and a Left and Right Hand Slide.In the Carbs you have the Pin Sticking thru to the Inside that Hold the Slides from Turning in the Bore.If you Switch the Slides they will be Backwards with the Cutout Facing towards the Cylinders.You will need to make sure the Cutout on the Bottom of the Slide is Facing your Intake side of your Carbs.I've seen it happen a lot especially with a Suzuki Waterbuffalo that I bought a Couple of Years Ago.It ran Fine on 1 Cylinder.The Other Two Center and Right Hand Carbs had the Slides in Backwards.I didn't Realize it until I had Cleaned the Carbs and Started reinstalling them.

Nope just a nicer new Job.

Have you had your Carbs Apart?Make sure the right slide is in the right carb.Is the Cutouts facing towards the rear?

Running Alcohol=Water.The left over Alcohol in your Crankcase draws Moisture.

Dodge Dakota. I can't complain my 90 3.9 is getting ready to Click over on 300,000 and has never had anything major done to it. A friend of mine Brought a Motorcycle down to me from Pennsylvania.When he pulled into the Driveway he had 2 Bikes in the Bed (Kawasaki H1 and H2) and was Pulling a 3 Bike Trailer with my 68 Suzi T500,a 73 GT550 and another Kawasaki H2. This is No Shit it only had the 2.5.He traveled over 500 Miles with the Hitch Dragging Routes in the Pavement.When he Pulled in His Clutch was Smoking.Right now it's still going with over 275,000 Miles.

I'm the Neighborhood Handyman.

Hey try this Maze Game.If you can Get to level 4 it's a real Killer.Make sure your Sounds on it kind of helps to get you thru. Maze

They Could be.I was Told they were J&R's.I did have a 2 into 1 Strader on it but traded up to these.I do Have a Water Buffalo with a 3 into 1 in the works.

Thanks Brooke.I don't own a Banshee As of yet but have done work a little Work on a Blaster Before.I'm Mainly into Motorcycles but still like to take the occasional Ride on a 4 Wheeler.I grew up Playing in the Dirt and will Probably Die with a Severe Case of Road Rash. Just for the Hell of it I'll post a Picture of my Baby.Some of you may Think it's a F&$% Retard but $h!t it was Doing good back in 1969 with 52HP stock.It's an Ongoing Project and hope to do some More Modern Upgrades to it.I'm still not Finished after 8 years but should have it finished before Spring.

Damn I feel right at Home here with all of you Felllow Two Smokin' Republicans.

Hello I'm new here.I'm needing some help with a Project I'm working on.I am Planning on Modifying a Set of Cylinders for a Suzuki (Yes Suzuki ) Piston port Cylinders.What I have Planned is Using a set of Banshee Reeds.What I would like is to see if Someone one the Board here would have a set of Cages that they would Either Sell (Hopefully Dirt Cheap)(A man can Hope Can't he? ) or Loan me to see if it will even work.If Someone has some that they would let me Bum for a few days I will only need One Cage.Any Help will be Greatly Appreciated. If anyone is Actually Interested I can fill everybody in on what I'm Doing.It's Kinda Old Skool,Non Water Cooled And Oil Injected.. ,Justin AKA Jughead Ugly Fat Old Bastard Motorcycle Club UFOB #19 Tennessee Chapter.