wacko2000

Dam stator cover wasn't listed, i was pressured into selling it though. Someone was relentless ^^^^^^ lmao :cheers: Joe

He sure did :headbang:

Great Buyer Stator, flywheel,coil, cdi,clutch cable,timing plate and harness SOLD Joe

Heres the deal, bought this bike on sunday- I bought it bc i basically wanted all of the suspension off the bike, so everything else is up for sale- If there is a item that you are interested in, but is not listed just ask me. Some items have already sold locally but i will mark them as sold and will also update as items are purchased. I bought this bike on sunday like i stated and I also took it riding on sunday- the bike is a straight beast, I have never ridden anything like this before, bike had INSANE power all over the place- Infamous and Nastyracing both road this bike so they can vouch for the motor and the rest of the goodies. Bike is a 2004 W/ TITLE All prices are shipped -Complete top-end (Drag Ported)- Cub W/ PISTONS 1250.00 (Jugs have been drilled, taped and plugged for future use of a fuel pump) - Noss cool head SOLD - 2 sets of Cut Cub domes 21 & 23cc 85.00 - 10 mil Twister crank w/ TZ and max load bearings. Trued and welded, Looks brand new 800.00 SOLD - Trenched, port matched and epoxied cases W/ extended studs. FAST put a lot of work into these cases 300.00 SOLD - FAST lockout cover W/ lockup, billet impeller, water pump cover,ez drain,dip stick, gasket and hardware 350.00 SOLD - N down 1-5 override complete with forks and FAST modded shift shaft. 325.00 SOLD - Billet basket, FAST clutch, New OEM inner and outer hubs and pancake bearing 275.00 - Straight cut gears 175.00 SOLD - V- Force 3's w/ Stuffers 175.00 - New OEM flywheel, stator and timing plate 175.00 SOLD - 2004-05 Yamaha Red titled Frame w/ radiator,handle bars, clutch and front brake levers,gas tank, steering stem and all motor mounts 500.00 PENDING ( Very nice straight frame, nothing is tweaked or stripped) - IMS foot pegs and heel guards 225.00 SOLD - Black Seat 70.00 - Complete rear brake setup w/ block off- Pedal to caliper 75.00 - Front Calipers and complete brake lines 60.00 - Thumb throttle w/ extended throttle and billet cover 60.00 - Front Quadboss bumper 70.00 - Rear Grab bar 35.00 - Lonestar Axle w/ brake and sprocket hubs 175.00 SOLD - Rear Haulers W/rims 22-11-10 (buffed) One ride still have the nipple 300.00 - Fr ITP sand stars w/ rims 21-7-10 Still have the nipples 130.00 ( one rims has some bend, does NOT leak) PENDING - 2 billet case savers 22.00 Each - 2 Kickstarters 45.00 each ( these were rebuilt by myself using HOLYMAN's tricks, they are solid and will not rattle) 1 SOLD - IMS shifter 25.00 SOLD - +2+1 Chrome Full-Flight a-arms with ASR monster tie-rods, SS brakelines and clamps 400.00 Any questions feel free to call or text me 7189134915 Joe Dont ask about the a-arms and shocks- Those are staying with me :headbang:

Money talks, he prob got 20 bullshit offers over the phone and through email already. Go there with the cash and show him your interested. Joe

Does it have a title?? with or without title bike isnt worth close to 3800 Id say closer to 2500

PM sent

PM sent, I have a set of nickel SB shearers for sale. Joe

Didn't HJR just build this? Maybe you should contact him

PM sent I have a 10Mil drag ported cub built by FAST 10 mil twister crank Noss cool head Straight cut gears Billet basket/ FAST clutch direct drive lockup and cover NEW oem flywheel and stator timing plate billet case saver 1-5 override 175 psi ez drain cover, pancake bearing, billet impeller etc Motor as all the goodies and is scary fast, was rocking it on a +4 swingarm Couldnt believe this motor had loads and loads of bottom end with 39's and shearers

PM sent, I have complete suspension for sale +2+1 full flight chrome a-arms works G-series front shock with remote rezzis +4 round house swinger Rear shock setup for +4 swinger Lonestar axle ETC Joe

Bike that this dude is talking about, I bought this morning and took it riding today. So i wouldnt pay to much mind to this post since its in my possession. Joe PS- This is the fastest fucking thing i have ever ridden in my life- Bike is beyond impressive, was built by FAST. Cant say enough about the motor- scary fast to say the least..Infamous and Nasty on here both rode this bike today aswell. 10mil drag ported cub, 39's,shearers on a +4 swinger = :whoa: :whoa:

Shoulder and collarbone injurys aren't fun, I messed my shoulder up in October and it's nowhere near being back to normal I hope you heel up- rest and don't push it, you'll only do more damage Let's see some pictures of the shee Joe

Dam i thought you guys were friends :rotflmao:

Im interested, Ive been through dozens of skid plates.. Joe

Well it wasn't a blow out- what are done to both bikes?? The 700's move pretty well with a few mods Joe

Mull engineering will properly cut your head for like 80.00 bucks No guess work buying a used one, tell him you mods, elevation, porting durations etc and what type of fuel and psi you'd like to run and they will get your squared away.. Hes done a few for guys we ride with, does great work and spot on Joe

That thing is begging for a busa motor - So much room inside the frame. Fun bike, Ive ridden one of these before- actually really smooth and quick Joe

Id sell the shock for what-ever its worth and hunt down a shock with a remote rezzi- You just missed a good deal on a rear axis shock- the dude parting out his yfzshee sold it for like 250.00 Your gonna spend some money but the gains will be well worth it. Joe

Id have to agree, thats one of the nicest YFZ's if seen also- I just sold my 08 with just your basic bolt ons for 4500- a little surprised this hasn't sold yet You should try ebay and YFZcentral Joe

I have never heard of them before- How cheap is cheap? Have you compared to like RMATV, they ship for free and very fast. Been ordering from them for over 10 years and they have never messed up a order.. Joe