g-rider

Intakes and UPP boots are sold, the PWK's might be sold will let everyone know soon. Everything else is still up for grabs.

Here is some pics of my stuff. Everything is dirty, but will be cleaned before shipped. I will be going on Vacation Aug. 26 thru Sept. 2, so if I don't get back with you soon that is why, but I will get back with you as soon as I get home. My e-mail address is [email protected]. Manual V-Force 2's Armidillo Overflow bottle bracket K&N Pods (The places on the filters is from the pegs on the frame where the factory airbox mounts) 35mm PWK's Outerwear for K&N in stock air box Stock carb boots cut for V-Forces Brand New head gasket

Banshee was sold last week, sorry.

Dual 35mm PWK's with throttle cable ---- $275 Shipped V-Force II's------------------------------ $125 + Shipping K&N Pod filters with outerwares------ $50 Shipped Radiator Armadillo Bracket (to use when airbox is removed) --- Sale Pending Stock Reed Cages ----------------------- $20 shipped K&N Outerware for filter in stock box-- Sale Pending Stock intakes cut for V-Forces---------- $15 shipped New Head gasket------------------------- $15 shipped New 15 Tooth Sprocket------------------ $10 Shipped

I have a set of 35mm PWK's with new cable for $275 shipped. I also have some more goodies. Check out my for sale stuff in the for sale section.

You have a PM

You have a PM!

I will try to get pics tonight but it will be thursday before I can post them.

I have a few parts for sale. I sold my banshee and don't need these anymore. Dual 35mm PWK's with throttle cable ---- $275 V-Force II's------------------------------ $125 K&N Pod filters with outerwares------ $50 Radiator Armadillo Bracket (to use when airbox is removed) --- Sale Pending Stock Reed Cages ----------------------- Make Offer K&N Outerware for filter in stock box-- Sale Pending New Head gasket ---------- $15 New 15 tooth front sprocket ----- $10 4x110 (honda bolt pattern) rear hubs for banshee - $50 MISC. STUFF Kicker KX300.2 amp (like new) - $75 MB QUART 6.5" Mids - $50 Eclipse 4x6 plates - $40 Sound Storm 620 watt amp (still in box) - $40 Don't be afraid to make offers. Most prices OBO If you see anything you want you can e-mail me at [email protected].

If I had another set I might, but no.

Come on guys make me some offers, this thing needs to go.

Bump Am I asking too high of a price? this is a nice banshee it just doesn't suit my style of riding.

I took the PWK's off and put the stock carbs, intakes, Ported reeds cages and airbox back on. I will sell the banshee now for $2,500 if anyone is interested. I would also trade for a 4 stroke sport atv, just let me know what you got.

Sredish, I sent you a pm. I had thought about taking the carbs and stuff off anyway to drop the price and sell it quicker if anyone is interested in that.

Come on guys this thing needs to go, make me some offers. I am also interested in 4 stroke sport bike.

TTT

Here is a few pics. I can get more if you need them. My e-mail is [email protected]

I have a 2000 banshee that I would like to sale or trade to a 4x4 atv. I would like to trade it to a 660 Grizzly or something of that nature. I would like something 500cc or bigger. The banshee has all yellow plastic on it, no cracks. It is in overall good shape. The motor is in excellent condition. It has a total of 8 hrs. on it since a complete rebuild. It has new .30 Weisco pro lites, new stock crank, New clutches, all new seals, new swingarm bearings, axle bearings, front brakes. The only thing wrong with the bike and it doesn't affect a thing is, the previous owner of the bike rode it in really rocky places and the lower a-arms has a few dents in them and the top right a-arm as a little bend in it but it doesn't affect a thing. The banshee has a newly rebuilt motor with coolhead with 20cc domes, .30 over pro lite pistons, dune port and polish, V-Force reed cages, Trinity Stage IV intakes, 35mm PWK carbs with K&N Clamp-ons, Trinity Stage IV timing plate advanced +4, It also has black Toomey T3's with polished silencers, Tires are 80 percent and I am sure I am forgeting somethings. I might be interested in other trades or partial trades, just let me know. or I would sell straight out for $3,200. I will get some pics soon.

I will check it again this weekend and see what I can do. I might just be expecting too much out of it I don't really know. If I could just get it to pull longer it would be great. I have just about figured it was in the porting. that is just my luck. I will be sending my next set of cylinders off to get them ported somewhere.

I tried 150's and did a plug check and it showed it being lean. I might have 160's in it right now I really can't remember. It was acting like that with stock carbs on it running 340 mains and I was told I needed bigger carbs, so I put these on and it is still doing it, just not as bad. I am about ready to pull my hair out.

What kinda port work is on the cylinders you have listed?

OK guys, maybe you all can help me out. I have a 2000 banshee that has been ported (Dune style by local builder), Cool Head with 20cc domes, V-Force 2 reeds, 35mm PWK's with K&N clamp-ons, I am running t3's uncut, the cylinders are bored .30 over with about 5 hours since rebuild, timing advanced to +4, anyway It pulls really, really hard from bottom to midrange and it will pull hard for a second on top before it falls flat. At first I thought it was running out gears too quick but I went to a 15/40 combo, so I think I should be alright there. I have tried larger mains and smaller mains and no help. I have tried Fatty pipes, T5's, Pro Circuits and the t3's and they all do it. I was wondering if it could be the port work. I don't know anything about porting like the specs and durations and all of that. My carbs a currently jetting with 160 mains, 48 pilots and clip in 3rd grove on cel needles. and My elevation is around 1,000 ft. Any help is appreciated.

Sub might be sold... I will know if a couple of days. Kicker 300x2 Amp...$80 Shipped Eclipse mids...$40 shipped MB Quarts...$50 shipped Boss Disc Changer without cord... $20 shipped Sound Storm 640 Watt amp (Still in box with all accessories) $40 shipped. All prices OBO. My e-mail address is [email protected] if anyone wants to communicate that way. Would like to do some trading on some CPI Pipes or Rockets, maybe even give a little boot or I have a set of Toomey black t3's I would trade with some money also. But I am open to all trades on this stuff, just let me know what you have.

I am digging the black. It's looking good, keep up the good work.

If you are wanting to keep toomeys atleast get T5's but between the two I would go with the CPI's for sure.