motocrossrider68

hey i have a polished clutch cover for a banshee that is profesionally polished. i got it and decided to get a lock out so i no longer need it. i will sell it for $130 shipped.

hey i live right on the salt water and when my bike sits the rust is hard to keep away from all my chrome. i hate polishing my whole bike and making it look brand new to find rust on some of my chrome parts after a while. i am looking for some kind of coating to put over them. i always polish them with mothers that says it protects against rust but i need something that will just coat over the whole thing and keep the rust out for good while still giving it a shine. let me know if you have heard of anything like this. any help would be great. thanks miles

hey i live right on the salt water and when my bike sits the rust is hard to keep away from all my chrome. i hate polishing my whole bike and making it look brand new to find rust on some of my chrome parts after a while. i am looking for some kind of coating to put over them. i always polish them with mothers that says it protects against rust but i need something that will just coat over the whole thing and keep the rust out for good while still giving it a shine. let me know if you have heard of anything like this. any help would be great. thanks miles

hey i have a lot of parts to get chromed and would like to get a bunch or banshee parts chrome and start selling them but need a inexpensive qaulity chromer. i could set up a dealer account. i have a resale license. please list some names.. thanks miles

i just ride the oregon dunes

hey im lookin to get some carbs i only ride dunes. like to do tree shots, drag, and hill climbs. after looking at my mods what kind of carb do you think would be a good choice. dune ported milled head hinson clutch/basket high compression pistons cpi small bore inframes k&ns vforce stage 3 reeds thanks miles

hey some guy is selling a lonestar blaster axle for cheap and said it was on his banshee. i was wondering if it fits good. also will the hubs work on it?? i already checked the length and it is good for me but i just need to make sure it fits good in the carrier and the hubs work on it. thanks miles

this banshee is custom Painted with a really expensive paint job that has lots of detail to it pictures dont do it justice. the motor work done to it is: Ported & polished ported cases welded crank ported read cages boyesen reeds dual 35mm keihn pwk carbs trinity t5 exhaust k&n filters pro lite pistons the following parts are either chromed or polished on it: a arms swingarm tie rods clutch cover cylinders and head brake resevoir everything on the handlebars footpegs brake pedal shifter and many more.... includes a full set of front and rear sand tires 10 paddle haulers in the rear The bike was fully rebuilt last winter. from the frame up removed every nut and bolt and inspected everything. anything needing replaced was at the time. the motor was also rebuilt at the same time all the seals and bearings were replaced and anything that looked worn. you can reach me at 253-495-9354. this bike has been very reliable i havent had one problem with it. usually starts on the first kick. 4500 i need to sell this asap.

hey last weekend at the dunes i bent my subframe and was wondering where to find one. i live in washingston. is there any place close to me that does subframes. also about how much do they run for?? thanks miles

just read taht frame was sold. my bad.

hey i am very interested in the frame. pm sent. please get back to me asap. thanks miles

i need a complete stock transmission let me know what you have. i need this asap.

i am in need of a good clutch basket with the gear attached let me know asap.

do you have a good banshee clutch basket w/gear let me know.

I am in need of the transmission shaft complete with all the gears i need the one the sprocket is connected to i need this asap. thanks,

i would be getting bigger carbs soon after that. i just ride the dunes and drag alot. i stay on the top end a lot so i know that it wont be a problem. i drive my buddys bike that was built by white knuckle which has cpi's and i like how the power ranges are. thanks miles

hey i am currently running t-5's on my bike. i have dune ported cylinders, reeds, jets, k&n, milled head, and i was wondering what hp gain i would get if i put cpi inframes on my bike. thanks miles

ya i am very familiar with the internal parts but do you think its on the inside or just the star or something under the clutch cover

how much?

i am currently having a problem with my banshee when i drive it first and second gear seem to pop out for a second and goes to neutral then pops back into gear. i have pulled the motor and taken the clutch cover off there seems to be lots of play in the clutch basket between the basket and the gear. could this be the problem or is it more internally with the shift forks and drums. any help is greatly aprreciated thanks

i am in need of a good clutch basket with the gear attached asap can send money via paypal

i need a clutch basket with the gear still attached please let me know asap i can paypal you the money.

how much for the broken lower case

the white one has a supertrap exhaust on it and a 350x front end conversion. the frame is also powdercoated candy red. there is also several parts that have been polished to a mirror finish the red one has an aftermarket seat cover and maier rear fenders. http://www.3wheelerworldforums.com/showthr...ed=1#post332976

hey here are all the stuff done to my banshee. how much hp do you think it has? ported by cascade milled head high compression pistons t-5's clamp on k&n's v-force reeds tors removed from carb. welded crank barnett clutch hinson racing clutch basket thanks miles