milo_32000

Hope this will help, Stock motor, PC pipes, no air box lid, 270 mains are dead on, in fact if I put the air box lid on it bogs, I`m 140' above sea level , Milo_32000

NO! they are kinda loud, but not like out of frames drag pipes, I bought a set from Chase and they scream, I love them, just a good around pipe, you can`t beat them for the price ! Milo_32000 Ps easy to jet also !

I noticed my right carb is leaking fuel a small amout of fuel out of the over flow hose when it is parked with the petcock is on, it usually cranks on first kick , now it take 4 or 5 kicks, so I think it`s flooding that cyclinder, how do I check that carb float level ? is there a simple way of checking this ? Thanks, milo_32000

Put me inline on the rear beadlocks , Thanks, Milo

I need rear axel bearings and seals, since Jeff is closed for a week or so who should I order from ? I would like to do business with someone on this board, if anyone has the bearing & seal # I will get them from a bearing company here, Thanks , Milo

Got a K & N air filter, instructions say cut the stock cage to fit, has anyone done this and what are the pro and cons of doing this ? Thanks, Milo

PM me I`m will take them , just let me know how much . Thanks , Milo

Wanted 2 XXTRA nice 9' rear wheels, if they were bead locks that would be a plus, have CASH in hand, let`s deal ! NO junk please ! Milo_32000

Let me know about the jets, what size and how many, have cash for quick sale ! Thanks, Milo_32000 , if the K&N `s are still for sale make me a package deal !

Not to say that I am am expert by any means, I have a stock 02 , fresh top end , P.C. pipes, I put 270 mains in and it cranked right up, but as I made a past down the road it bogged at half to full throttle , I took off air box lid off and it runs like a bat out of hell, have not done a plug chop yet, but I will bet it is not far off, I live about a 100 feet above sea level, if that is any help, let me know what you end up with ! Good luck !!! Milo_32000

You guys have been much help before, just did a top end job, and put a set of Pro Circuits chambers, I am jetted 270 on the mains without a air box lid, runs great , but my question is do I really need to adjust the brass air screws on the the carbs ? , after bike sets several days it is hard to crank, once it is warm will crank first kick, would this have any relation to this ? I am about 100 feet above sea level, Thanks , Milo_32000

First of all I did a search for kick starter repair, No luck , my kicker starter sounds like #, has anyone got a fix that I can fix myself ? I put a new O ring on one and it jumped off and i have not found it yet, bought one of Sam { thanks buddy } and it has some wear also, is there something that will help me to keep it from sounding like a bucket full of bolts ? Thanks , milo_32000

I have a 02 Shee , bone stock, no air box lid, fresh top end, and a set of Pro curcuits I bought from Chase@ Miami, just bolted them on and put in #270 jets and it rips, never had to touch anything else, lost a little off the bottom {not much } when these pipes sign on you will think you had a hit of nitrous, Milo32000

I have no good reason but I`m going to replace all my a arm bushings, I have seen somewhere someone makes brass or bronze bushings, is that the way to go ? or replace with stock plastic ? If so where to buy ? Thanks , Milo_32000

You have a PM

Broke you have a PM Milo_32000

Got home this afternoon, fired up the ole shee for a little ride, low and behold went to friends house , bull shitted a little bit and jumped back on the ole sheee and guess what , kick starter was gone, it fell off somewhere, damn really felt like a dumb ass having to ask friends to push me off, but was just a little push and she fired up, thanks to the new top end Jeff @ FAST and the new PC pipes that Chase sold me , but my question where is the best place to buy a whole kick assy. ? Thanks , Milo32000

Why would you put heavy and soft together ? Not trying to be a smart ass, just want to know why ! Is it too much lever pull ? Milo_32000

I have a 02 Banshee, would like to buy a rear axel that is in perfect shape, let me know what you have and price ? Thanks , Milo_32000

This just happened to me , new top end, put on Pro Curcuit pipes, put in #270 jets, fired right up, then rode it and it fell on it`s ass, so I pulled the air box lid off and it rips, still has a litttle bog off idle, guess I will have to raise the needles to cure that, if anyone has some input on this please respond ! Would have tried #260 but didn`t have them ! Thanks, Milo_32000

You have a PM, Thanks , Milo_32000

How bout a pic of the wheels, I`m interested, if they are in nice shape ! Thanks , Milo_32000

Damn, Jeff is a GREAT person to deal with, ordered pistons, ,rings, gaskets , case saver and 2 lug nuts , he informed me that he did not stock the lug nuts, he offered to take them off his bike for me which I said NO, {can`t have him riding without his nuts ! } and guess what came with my parts and 2 brand new Yamaha nuts at NO charge ! Now is that the best service anyone could ask for !!! Thanks Jeff , I owe you , Milo_32000

I found a rz 350 junked out, supposed to have a bad crank, has been sitting up for several years, are the cylinders the same as Banshee other that the power valves ? Are the power valves a plus ? and is it worth fooling with ?

I have an OMF skideplate, looks great, bolt holes align up, but the swing arm chain guide hits the plate and won`t fit , am I doing something wrong ??? Do I need to grind it off ? I really think they would have designed it to clear something as simple as that, or am I to throw the guide away ?, No way ! Thanks , Milo32000