Jump to content

billy d

Members
  • Posts

    19
  • Joined

  • Last visited

Everything posted by billy d

  1. do you have pic of swingarm?...hows the chrome...
  2. ill take the +6 if it comes as pictured...paypal please
  3. did you find a set of oof pipes? ive got a set of racers edge chrome...2 out stator side...beautiful pipes...but they have the little hole near neck because i run a EGT...can be welded closed with stainless and not seen...
  4. pm me doc...im bouncing back and forth here and PS
  5. ooohhh my.....may need to port your boost bottle...dude i also wanna see this oil filter
  6. check the eccentric bolt that centers the shift shaft...behind clutch basket....
  7. huge...got a buddy with same setup...he wouldnt buy bigger carbs..any ways elevation 2500 ft he is running 420 jets and reads good...you probably should start 440
  8. vitos maybe a little cheaper...but the one jeff sells has the allen head in the center...much easier to adjust...and hes a sponser what the hell is wrong with you...LOL
  9. yes...but have you removed the pilots and cleaned them completely...if you have to choke it you need more fuel...and the 27.5 should be plenty big
  10. interested in a-arms...what brand and hows the chrome?
  11. one more thought...make sure your spark plug cap wires are good and not rusty or broken
  12. ive had stator windings ohm good and still be be bad...if you have another winding...try swapping it out...be sure to check your ground wires...have you got a ground from coils to motor case?
  13. s/b or b/b...i have a set of sm flange big bore shear with polished stingers chrome pipes
  14. well ive done about everything to my 10mm that i can short of nitrous...all i want for christmas is a boost bottle...A REALLY BIG BOOST BOTTLE...MERRY CHRISTMAS GUYS...
  15. yep...pivot bearings would be my guess also!!!
×
×
  • Create New...