trinityshee

i have two minkuni carbs for sale that are practicly new used for apporx 1 week of snowmobileing they are round slides measures at engine side inside bore of carb at 33.99 mm so i belive they are 34 mil carbs make offer WILL TRADE FOR CRANK SHAFT THAT WORKS GOOD pics avavble on request

thank you that is exactyl what i was looking for

pm sent

where can i buy just the cable for this i cant find one any where ? and i am putting bigger cabs on my banshee and the one hits the cltch pivot how are u guys getting around that pics would greatly help

i need a good shape axle and all 4 rear hubs for a banshee if you got one lemme know my shipping zip is 14468 in ny!! thank you i would like to spend in the 100.00 to 175 range if at all posible

thanks guys for the replys i aprciate them if you guys want to give me a shipping price that would be great my zip code is 14468 i live in hilton ny

how much you looking to get for it and do u have a tittle?

ok heres the deal i bought a banshee and the previos owner cut alot of stuff off that he shouldnt have so i need some brackets and what not so if some one has a wrecked frame taht has good head light brakets rear fender brakets and a readable vin number posibly a tittle to i would prefer in western ny. lemme know what you got

over the summer i rebuilt a trinity motor basically the same as what u have. and it rana i dentical to what you are saying idle mint only rev a litlle and bacfire once in a while. and what we found was the stator was bad and the weird part was it tested perfect . i swaped the stator off my banshee to it and it ran great so i would try a stator if the reeds dont work.

ok as of now the quads all apart and in the basment pix can be seen ---> http://pg.photos.yahoo.com/ph/zimdawg19/my...del%3as,1%3af,0 i am going to need a enitre hub to hub axel and carrier assembly. plastics, and either new calipers and rotors or fix what i got , and sime tires. I would like to get a set of pipes and griper seat cover and nerf bars and front bumper. the cougar in that link was what i traded for the shee

im working on pics before i put it in the basment for the rebuild.should have them tommrow they arent pretty but i only paid basically 600.00 for it so u get what you pay for but im up for a challege. P.S this is a bone stock banshee not anything sepcail yet my name was mad fora friend that we built over the summer.

thanks guys i was so bumed after i got ride of it . how much do you guysthink to have a frame chromed?

Well guys i made a huge mistake a while ago and traded my banshee for a snowmobile. the sled turned out to be junk so i parted it out and i wanted my shee back .so last night did just that and i traded my other sled for my banshee back. its rough although it does run . i am going to be doing a frame up build on it for the spring time and will get plenty of pictures

mine did the same thing this weekend i bet the center nut backed off and the entire hubb it moving was a really easy fix just a pain casue u gotta take the case apart

will u combine shipping ? and if so how much shiped for all to 14468 and i dont really know what a used axel goes for nor do i want to insult you so if u could tell me a price maybe pm me ill let you know thanks again

thanks for the insight but i hate waiting for auctions to end and be out bid. do you have anything as for a buy it now price on the axel and are the ball joints tight on the arms?

i need both upper arms from a a- arms banshee. also looking for a straight axel and all the hubs pm me if u got anything thanks dave

aright im new to this sit and u guys are the best . i have been reading alot about electrical probems and what not due to i have been working on a 95 banshee for a firend . it is a trinity 420 with a stroker crank and a 2 into one carb set up. didnt run when he purchased it and come to find out it had a bad lower bearing and no spark any ways the engine got fixed and he got a new cdi box and it had spark and every thing but still wouldnt run! now i have a service manual and the electrical facts about banshee and everything tested fine untill i put a scope on the pick up coil it had a VERY week out put even though it tested right it was bad so i changed it and holy crap it runs. i have a stock banshee and lemme tell u this thing is rediiculous so once again guys thanks for the info i learned here trinityshee!

what do you guys think about these arms rembering i dont have a ton of money i know there not lone star or any other top brand but tehn again my quad isnt a racer its just a rideing machine http://cgi.ebay.com/ebaymotors/ASR-Yamaha-...1QQcmdZViewItem

thank you very much

becasue my ball joints are shot and i dont have 300 bucks just laying around to get new arms and i got a set of blaster arms for cheap and are almost new

so they wont bolt to the frame at all or spindels????

i have l done a serch with no help so can any one tell me if blater a arms will fit a banshee the look the same i was just curious

i need a rear axel and all the hubs for a banshee please pm me if any one has one for sale

thanks for the info . i have alreaady removed the eniotre tors system and harness the only wireing this thing has is what it needs to run from the stator to the cdi box to the coil... like i said b4 thoguh it will only run but acts like it has a rev limiter with the green and yellow hooked up. if its un hooked it still sparks but will not run it only trys to start.