noslo98

I have the chariot pushers in stock pm me if you need one shipped.

Cool snatch it up, there 250 retail new for wiseco but I can do better than that but prob not 4120...LOL

Yes 2003-2010 Are all the same Crankshaft. You can get a wiseco replacement one at a cheaper price P/N WPC140. If you need one I am a wiseco dealer and can hook you up.

Correct the CPI SB vs. BB the only diference is the stinger size. But the 440 cc rule does not always apply. You need to find what pipe works best for your application. We use BB on most of our 421cc 4mil cubs and have used them on smaller ones as well. I have been testing on my bike this past week and it makes better power with the BB over the SB. Not by much though but if you can get away with BB its a better option since it helps with detonation problems.

For that setup without knowing your actual porting I would just do T5's The CPI likes higher port timing than a typical trail port. If its a true trail port you will not like what you get with any of the drag pipes. It will turn it into a light switch more than llikely. Dont under estimate T5's there an awesome pipe and make a nice setup for dune/trail/drag setups. Some of the funnest bikes I have ridden were just dune ported with toomeys.

I have some small bore on my bike for dyno testing if I end up needing big bore I will have them availble for sale. Should know by mid week if you dont find anything. What part of Ca are you in?

From what I can tell from the pic here is some info on it. POLARIS P/N - 1541962-067 FITS - 2006-2008 RMK 600/700/800

Fast... Depending on track and setup 120-140mph. It takes your breath away its no joke. I have had fast cars and bikes and this is by fr the quickest thing ive been in or on. Its not just the top speed it is insane on the track.

You can run the toomey stinger/silencers on them. Thats one option for you. Get them from toomey direct Or I can get you them I am a dealer. Or you can run the fmf but the fmf pipe w/toomey silencers make better power.

Emmick 125 Shifter Kart Honda CR 125 engine in top condition only 3 practice sessions on complete rebuild. New bodywork,50MM axle, Lo Vol Mag Wheels W/MG Yellow tires (also spare set of new tires),Mychron 2T, plus much more... Kart needs nothing everything is brand new or in new condition. Comes with extras tires,wheels,srpockets,gears etc... (pic is with old tires Kart has new sep on it with 3 sessions and also comes with another brand new set) $6000/OBO or Trade for dirtbike or something else???

I need 2 good working rear calipers and a set of 38 or 39 PWK's either gas or alky.

24 Mil Twister 748CC Twin, Crank just got back from Twister has new rods & bearings. Topend is fresh as well as a brand new 2-5 Override W/Billet Second. Motor has the best of everything and has ran 3.50's at every track it has been to. Built by one of the top builders in the industry no expense or detail spared.Comes with the stock ignition not the pvl that is in the pics $7500/offer Complete or $6500/offer W/O Carbs & Pipes. I am open to possible trades as well??? Greg-916-532-4450 or 916-729-7433 78 Bore Twister Cyls 78 Stroke Twister Crank Matoon Billet Cases W/Windows Matoon Billet 10 Plate Clutch Matoon Billet Clutch Cover 2-5 Override W/Billet Second Stock Ignition 39mm Pwk's Shearer 2 out Right Drag Pipes Much More motor is ready to bolt in and run price is for complete setup from carbs to pipes.

Dude that won the previous auction never paid so its back up for sale if anyone is looking for a bad zz motor at a smoking price. May also trade or trade plus cash depending on what you have. 24 Mil Twister

If anyone is serious about a trade let me know, im open to options I have not ran a bike in over a year so im kinda over it now. Possible trades: smaller hill/drag bike plus cash,boat,side by side,dune bike,CR 500AF... im open

Possibly im kinda looking at boats ??? too much water down here around me to not have one.

24 Mil Twister 748CC Twin, Crank just got back from Twister has new rods & bearings. Topend is fresh with no time on it as well as a brand new 2-5 Override W/Billet Second. Motor has the best of everything and has ran 3.50's at every track it has been to. Built by one of the top builders in the industry no expense or detail spared. $8500/offer or possible trade. I have nothing to use the motor in since the chassis sold. I am open to possible trades within reason like a dunner,rzr,car.etc... Please dont dother to ask if I will trade for your stock cyl motor or little 4 mil cub, You know what this thing is worth. If it dont sell im just going hill racing with it bit if its something your interested in or think you have something I want let me know. 78 Bore Twister Cyls 78 Stroke Twister Crank Matoon Billet Cases W/Windows Matoon Billet 10 Plate Clutch Matoon Billet Clutch Cover 2-5 Override W/Billet Second Stock Ignition or PVL (Your Choice) 39mm Pwk's Shearer 2 out Left Or Right Drag Pipes (Your Choice) Much More motor is ready to bolt in and run price is for complete setup from carbs to pipes.

We have brand new toomey sparkys in stock for $99.95/Ea. Greg Adrenaline Powersports (916)729-7433

What do the domes look like buddy?? Are they the square ones??? Whats a dome look like???? How much for the stator cover?? Will this fit my twister??? Bump..Bump..Bump for a stand up dude!!!

99" Spongebob Chassis W/Bar. +34 Front / +15 Rear. The chassis has very little use on it and sponge is no longer building these so if you want an original here is your chance. Chassis is the only one sponge built that had presurized frame rails for use as air shifter tank pretty awesome setup. I will also sell as a roller for the right price. $3000 plus the ride.

24 Mil Twister

We have brand new yamaha mounts in stock pm me if you sill need them.

The bike is sold. I still have a JJ&A axle availble though complete with all hubs for $475 Shipped.

Alright I am going to go ahead and start parting this thing out. I would like to keep the front marvins on the chassis since they go with the front end and am open to offers on the chassis. The rear marvin is a coil over which is hard to see in the pic.Also I am keeping the jj&a axle but i have a lsr drag axle that is availble.

+14 lsr style chassis with +14 ladder style swing arm. Torchworks drag radiator,Alum tank, marvins, lsr axle, jj&a drag cut front wheels with lightened spindles. 10 mil cheetah 72.5 bore,2-5 override,vforce 3 reeds, 39 pwk

This is the one availble from Trinity but almost every banshee supilyer carries them. http://www.trinityracing.com/products/yama...sheetiming.html You can get cast ones as well that are a lot cheaper, also you can have your stock plate modded by any shee machine shop.