hellride96

just wondering if any of you guys know if a rear yfz 450 shock would fit on the rear of my banshee.????

ive got 1 also....its already powder coated black ill take 40 bucks for it

looking to by a 4 inch ext swingarm for standard carrier. anyone know where to find one or have one for sell

want to buy a 4 inch extended swingarm. perfer to be able to use stock carrier. would also be great if it had skid plate tabs. let me know if you guys know where i can find one.

pm sent

want to do a little porting and polishing on my cylinders? wondering where/who is the best place to go and wont rip your head off. unless the work is that good and then i dont mind paying a little extra. any info would be great.

what does a race harness consist of, what do you take out???

thanks, ill look into that, ill stick it back on the dyno.

any suggestions???????

im runnin a 400cc cheetha kit, 35mm kehins, t-6s..... every once in a while say every 10 races my wheeler acts like it gets a dead spot in top of 5th or even sometime 6th gear and boggs. if you let off the gas for a second and get back in to it, its fine. i can go race again and it may or may not happen again. also wondering if any of you guys have ever heard of runnin 2 petcocks, one for each carb???? could my bowls be sucked down that quick???? if it could be electrical, where would i start? thanks for any help

would like to buy a 4 inch ext swingarm, or if anyone could put me in the right direction to have a good one built. any help would be great

there's at least 15 of us going, and thats with some of us backing out at the last minute, but we've always have a large crew when we go up.

a large group of us from the dallas area are going up for a long weekend, leaving friday morning coming back sunday night, just seeing if anyone is going?

did awesome work on my flywheel to lighten it. very cheap smooth as butter

jen i need you to deliver it to me asap......travis i think your following me

listen to loco, he is exactly right, thats exactly what you need, thats what im runnin dual 35's. good luck

to each his own...............im runnin t-6's with a ported and polished 400cc big bore cheetha kit from trinty....35mm kehin, ive got my carbs tuned in perfectly with my pipes and have no problem at ALL drag racing or trail riding. i had t-5 before the 6's, and 5's are a better all around pipe but the 6's are good from mid to top. but still a good pipe. good luck choosing

with your few mods you have, and your elevation, 280's should be just about right for your bike. thats also what toomey says to run at that elevation. 3rd clip down on needle. you could change your pilot jet if you wanted too, but with your mods it may hurt you more than help you. good luck

im in were are you located,,,,,,also pm sent

yeah were camping. on south camp. ill be in a white lifted 02 super duty. pulling a blue yfz 450, black and red banshee and black warrior. ill be looking for you guys....

sent pm

a large group of us from dallas will be there....leaving out wed. night and staying until monday

ive got a 96 banshee with a trinty 400cc big bore kit. its the cheetha kit. has v-force reeds, 35mm kehin carbs, k&n clamp on filters, trued and welded crank, hinson hub and clutch basket, barnett clutch, mod. shift cam and shift star for easier shifting, cylinders ported and polished, red plastics with black fuel tank off of an 01 banshee, black tribal flame grafics from alba. frame, swing arm, all wheel hubs, sprocket hubs, foot pegs all powder coated black, axle and carrier chromed, all new bearings and seals in entire bike. ext a-arms 2 out and 1' forward, has holeshot hds on rear stock tires on front, tag handle bars, chrome flamed grill, chrome toomey t-6's,banshee was dyno-ed at little sahara at 72 horsepower. engine just under a year old now, this bike has been completely gone through, only thing stock on this bike is the shocks. let me know if your interested.....

were is ector texas???? would be cool to go and watch

yeah we all made it down....we were in north camping, if yuor were coming from the dunes we were just right of the gate....awesome weather except for sunday morning and all the rain that hit. post back up before the time you guys are going back up and we'll see if our weekends meet. i do know were going back up for memorial weekend for a week. sorry we missed you guys also. we had a great weekend. (did you guys make it in the HEEL CLICKER?) ha ha