Bmatlock

That may be a little far for a trade I would think. But Im in Illinois. Brian

I have a 1998 Banshee for sale or trade. It has toomy T-5 pipes, 2 sets of front and rear tires, Fronts are new and rears also, Nerfs, plastic has usual scratches and it runs awsome. Just been rebuilt no bore required they just put oversized rings in it. Im 35 now and its sad to say I have out grown speed. Now I need something to chase my 3 kids around and get them unstuck with out getting off the bike to do so!! With 3 back operation later time to hang the shee up. This thing runs awsome and has given me alot of great years. So if anyone interested my number is below. I would be willing to meet 1/2 way up to 100mile radious of Decatur. Illinois 62521 I am looking for a 4x4 Utility ATV 400 or bigger for Hunting and trail riding. No sport ATV's please and no junk either! Mine is in top running condition and expect the same. This ATV came out of Michigan where they do not require Off road vehicles to have titles. If you need the VIN to run the Motor Vehicle record your more than welcome just ask. I already have and there are no problems with it and can be titled you just need to apply for it. Pics available just ask...! Brian Cell 217-322-7402 for faster response

where are you located at?

Traded Thanks BHQ!!!

1998 Dodge ram 1500 ext-cab 4x4 Brand new trans by Wendels in Decatur needs tires everything works red in color Located in Decatur, Illinois 62521 Pics available upon request... Trade for: 4-wheeler Banshee or 4x4 Must be 400 or bigger if other than a banshee Sport ATVs ok also.. bass boat smaller car or truck Older diesel or what ever just ask Brian 217-322-7402 brian_matlock@hotmail.com

Well I had three surgeries and the last one finally took... They ended up putting a artifical disc in L4-L5 lumbar... It seems to be better than new.... I am still going to have to hold out on the big air, but maybe it's time anyway.... And by the way, it started right up!!!!!!!!

Man my last login was 2004!! WoW this site has changed!! Looks Great......! I was the one who started the Good guys list for all who remembers me! Any way it's good to be back!!!!!!!! I havn't rode in a while due to 3 back surgerys and just fired it up again after 3 years!!!!!!! Had to knock th cob webs off it LOL!!!! Later Brian :beer:

how much? send a ppic to amybrianmatlock@comcast.net brian

Still waiting. Do you have them yet? Thanks, brian

Whats the mearurements? Still interested! Brian

That's funny!!!!!!!!!!! Brian

I am working on a deal right now for the whole bike. I will keep you guys posted Brian

Well if they asre there no good to me. My bore is 68.50. I'll wait and see what he comes up with. Brian

gotta be on here! LoL Brian

Give me a size in MM and if there 68.50 or larger I will prob take them. I also need to know where both ring pins are in reference to the top of the piston looking directly down at it in a picture pointing with a pen. Even the center wrist pin height to the top deck of the piston I would need. Along with the total length. Sorry for all the questions but I need to know if it matches my setup. I think they do. I let you know what else in measurements I am going to need. Mark them sold pending the measurement verification please.. Thanks, Brian M amybrianmatlock@comcast.net

Whats everyone waiting for me to say I will part it? I still don't have enough interest to do it. Forsale whole still. Brian.. For those who PM me I am keeping track but have not said prices as of yet.

Please send part out requests in PM form. I don't want to get in trouble for not listing part out prices when the add is still for sale whole. Thanks Brian M.

So far little interest in a part out. Bump also, Brian

Will also trade for ? Paypal accepted and prefered! I have a complete 1996 shee that i may be getting rid of with enough interest. I can sell whole or part out.But whole is prefered till enough interest is there for me to take it apart. Banshee is still assembled minus the top end. If interested in parting please PM or email (email below) me stating interest so it dosen't interfer with selling it whole The list is below: List 1.Frame red candy metal flake spray bomb paint looks pretty good. (Complete) No Title just bill of sale. It has never been titled that i know of will provide bill of sale with copy of my DL. 2. Bottom end, new clutch, New Weisco Crank (Only 2 hours) and new spare clutch still in package to go with it. 3. Top end is a complete LA Sleeve 409 Mono block kit with carbs and filters just back from the machine shop with fresh 68.50 bore that has never been installed yet. Still need to buy pistons for it to be complete ready to install. It includes stage II porting, CT exhaust system, Klein 35mm carbs and RAD valves (It retails for 1960.00 on www.lasleeve.com it has everything minus the pistons (Havn't bought them yet sinse getting it back from the machine shop) 4. Front razors 80% on aluminum rims has scratches/dents minor in my book 5. rears puresports are used 40%and need to be replaced on aluminum rims. has scratches/dents also minor in my book. 6. White plactics with stains, red gas tank shroud, stainless grill with flames. Red Ceet Graphics with seat cover Plastics have never been cut. front has a battle wound that it stitched with zip ties. (If you plan to race cut the battle wound wont affect it) 6. Gunnar kill switch 7. Prodesign water pump impeller 8. Adjustable timing plate 9 rickey Stator 10 Works triple rates w/rezies on the front and stock rear. 11. Steel nerfs 12.Pro circuit pipes with 304 silencers 13. Polished stuff Aluminum clutch insert, Brake cover, REAR BRAKE CALIPER, polished rear break block off, Throtle cover 14. Aluminum tie rods hex powder coated black And prob more that i just can't think of right now. To sell whole 2500.00 for now until interest sparks for a part out then I will post prices. Thanks, Brian M. amybrianmatlock@comcast.net I live in Bradley Illinois right by I57 exit 315 next to Kankakee. Pic is in my sig and also more pics avalible upon request. Will trade for other stuff also. Open to offers.

Could I get a pic of the 12) MSR billet shifter--15.00 shipped I am interested. Brian M.

Send a pic of the rears to amybrianmatlock@comcast.net Brian m.

Next in line if it's still for sale. let me know either way Brian M.

Send me a pic if you could and a list of whats still on it..I will take it pending your response. When would you want to do the deal? amybrianmatlock@comcast.net Thanks, Brian M.

send me a pic to I am looking for a rear. amybrianmatlock@comcast.net Brian