XxMeltIcexX

Did the shop have the pistons before they bored? I've got in the habit of having them match it directly to the cylinders, as i've had them off so far that the compression has dropped, as low as yours.

Bastard, those dunes look sick. Awesome trip I bet,

Airbox Pending Payment....

Great heads! Use stock studs, cool for efficiently, and improve throttle response with smaller domes. If you still want to run pump gas id stay below 150 psi. Its an easy mod, just swap out stock head. The dome size chart is on the NOSS site. I run one and couldnt be happier.

SOLD minus the axle.

Payment pending on Swingarm, Polished calipers w/ brake system, axle, a arms, and brake rotors.

replied

bump

Just ordered some drag cut rims and SLS, thanks anyways man. BUMP

PM Sent

I wanna get this stuff outa my garage, shoot me offers via PM. PCed Metallic Blue Swingarm w/ Carrier, chain adjusters, brake line, chain slider, and chain. No Needle Bearings or Sleeve PCed Metallic Blue A Arms w/ Dust Caps and new Delron Bushings. Boots arent perfect. PCed Metallic Blue Stock Bumper never mounted since PC. Full Front Brake System with Polished Calipers. Stock Head, has some dings inside but not bad at all. Stock Reeds, one reed petal has burn mark on it. Stock Crank needs total rebuild, rod bearings came outa stator side and kaboom! Rods still in good shape, would be fine if rebuilt. Stock Coolant Bottle.... lol Stock Air Box with Toomey Air filter, Lid has two holes for air flow and two clips are missing but it seals fine (id run it without lid anyways). Stock Stator Cover comes w/seal, has dings on it. Stock Water Pump Cover, has dings on it. Stock Clutch Cover Insert. Two Chrome Grab Bars, one has good chrome, other has some rust on welds. Old Style Tail Light (not brake light) Stock Shifter, Got snapped off at the hill once upon on time (im thinking), some numnut welded it on (terrible welds) but I want it gone. Stock Motor Mounts Stock Exhaust Seals Front Brake Disks Front Fender Brackets Chrome Skidplate, has dents and chrome is not perfect at all, looks better than stock. Stock Gas Cap Stock Tie Rods, one end is bent, everything else is straight. Stock Axle, Polished it when I didn't know better, Chingered up around bearings. Like new 20x10x10 10 Paddle Extremes on Blue Labels. Get this shit outa my garage, open to all offers... Eric

Thanks Tim, Figured id just work this motor afterall.... Too much trouble gettin a new one now.... Ordered some SLS's on Drag Cuts all the way around! Need to sell some shit!! Comon people! Give me some offers!

Awesome heads, Dave that head makes your cub look weathered, a quick mothers job will do the trick :biggrin:

Thaks, BUMP! Buy those damn paddles and Calipers, Might save my motor from bein scrapped...

Polished Calipers (have whole front brake setup that goes with it)- $130 shipped 20x10x10 10 Paddle Extremes on Blue Lables (Max of 10 hours on these)- $250 Shipped Motor - Everythings polished (no stator cover), Cylinders 2nd over bore on wiseco pistons and Ported by Trinity (Old school port, not the shitty port jobs they do today), 18cc Domes in Noss Coolhead (185 psi at sea level) VF3 Reeds with Cascade Stuffers, and Trinity Stage IV Swirl Intake. Because of polish work i'm asking 1800 OBO. Runs strong and stomps on most ported shees and 4 pokes. Cylinders started with RNBRAD as brand new and I bought them off him almost three years ago now, just started running them last year, this si the bike they originally came from: Brad will tell ya aswell how strong this motor ran. Gotta go bigger tho!!! :biggrin: Eric

:laugh:

Ill take them for 250! :biggrin: Going to get some drag cut rims on some new SLS here soon if I dont find a killer deal....

I wouldnt chrome a chassis, if the welds arent perfect it will not look very good, I thought I liked chrome - damn man.

ill sell you my set up, stock stroke ported 2nd over bore, 5 hours on pistons, fully polished PM me if interested.

someone will help you out with a crossover tube around here..... Start it up and see how it runs, it shouldnt be too off if even (elevation considered of course)

My group backed out on me, I'm still plannin on goin if we can get a group together

Steel wool and some polish (mothers will work, but I use a bench polisher with white rouge) Eric