Jump to content

sheerider11

HQ Premium Member
 View Profile  See their activity

  • Posts

    12,928

  • Joined

  • Last visited

  • Days Won

    107

 Content Type 

Everything posted by sheerider11

  1. sheerider11
    I got a long clutch and a shorty brake. I wouldn't have it any other way
  2. sheerider11
    Of course that shit box is here in Nj.
  3. sheerider11
    Great guy. Hooked me ( my girlfriend) up with a killer deal on some plastics. He went to ship them, got a better deal. So he refunded the difference. Stand up guy. Plastics haven't arrived but I'm sure they'll be good. He sent me a picture of a boot scuff worried I'd be upset. Good guy here
  4. sheerider11
    Is it true they strip easy? I've cranked those fuckers. And my one front has a slow leak. I'm gonna have to look into it.
  5. sheerider11
    Bump
  6. sheerider11
    Very strange. Maybe because it's for the 90?? My clamped on my 1-1/8 fat bar end and my flex ends. I thought all Atv/mx bars are 7/8 ends
  7. sheerider11
    I was told no. That's the only thing keeping me from doing it. But you can send it to asv if you want and they can change the part that pushes the master
  8. sheerider11
    If I find em, there yours. Good chance they all ended up in the trash tho.
  9. sheerider11
    I never take the plates out. Remove the pressure plate, big nut, slide whole shit off at once. Plates hub and basket stay together. But like said, it dosent matter. It only takes an extra 2 minutes. And if it is stock the rubber bands can be thrown in the trash
  10. sheerider11
    Bump
  11. sheerider11
    Guy at 3:18 had a good plan
  12. sheerider11
    I though she finished getting the plasti dip off. Clearly she didn't. Only the fronts were finished
  13. sheerider11
    Front and rear only. Full rears fronts cut 100 plus the ship OBO Shipping will be about 60-80 depending where you are. Lower 48 only for these. Will get pics when I get to the girlfriends house
  14. sheerider11
    NO SHAME!! I like your style.
  15. sheerider11
    Was it a pin pushed out of the plug a little?? I had that happen. Real bitch to locate.
  16. sheerider11
    I like naval jelly. Eats the rust. If the pipes are new, don't use Brillo or steel wool. If there old and not great looking, do it.
  17. sheerider11
    That's such a weird term. I only here other countries state it like that. What do you think about is calling them grounds?
  18. sheerider11
    Try grounding the motor. Mine was a lawn mower starter cord. Was a little long so I had to run it around. But I run 4 dampeners so maybe the ground helps, maybe not. But I will say it dosent hurt it.
  19. sheerider11
    Pfffff an air leak? With a hole drilled in the side of the carb? Nonsense.
  20. sheerider11
    I route it to the ground
  21. sheerider11
    You need to up the pilots then. Running a little lean. 27.5 or 30 should be right around what you need depending where you are
  22. sheerider11
    One time I found a turtle.
  23. sheerider11
    Are you fucking with me?
  24. sheerider11
    I think you need 66.50. No replacement for displacement
  25. sheerider11
    I've never seen a Yamaha stamped rod

BHQ Quick Links

×
×
  • Create New...