mccarty7

yeah, agree. if it aint broke, dont fix it

have a question! i have never race asphalt, only sand at canyon raceway and speedworld. how in the hell is your 7 mill running 6's or 5's? ours run4's. and out 14 mill runs 3's. Watch the vids on planetsand.com . no lies. I would think there would be more traction on asphalt. Any info??? ~Ryan

i can tell u yes u will need to re-jet. nomatter what u do to your bike, check the jetting always. i dont care if u change a head-light.....check the plugs....lol, jk. i have 68mm domes. u will be throwing more gas than stock to fill the needed space. if u dont rejet, it will fill that needed space with air. bad combo. lol. boom. or crackl clrackle...RUN LIKE A RAPED APE......then boom.

9's are hotter. i run them in my 7 mill. 8's and 7's have a cooler spark. had to get that out.

your clutch is giving in, right? pull it in and nothing happens? check the nut on the pressure plate. snug, very snug, just dont impact it. get a clutch saver. 50 bucks, worth the money. wont burn the clutch. make sure there is that washer between the nut and pressure plate. i impacted mine about 5 years ago and it shattered the washer, lost the clutch...... that's when i figured over-ride alchy was better.

to thick. no cover on air box. outerwear if u want, mines tempermental but i dont have a warrior. had one, then slid off a cliff with bald tires. broken rib, cracked rotator cuff and oh yeah! ....punctured lung. lol. saved it, fixed it, sold it. half the jet man. unless u want it like that.

lmao. thats hilarious. chocolate ,ilk is what i say to people. no white, not even the littlest dot. if u have white, jet one size bigger or up your pilots just a touch....(one size)

I take it, no one here runs on alchy. You can put castor in an aclhy tank but i wouldnt recommend it. It seperates too quickly and it doesnt mix well at all. Klotz is 20% Castor. Blenda with alchy and methenol. Just depends if u want a well lubricated engine or not. Since the oil in my gas is the only thing lubricating my engine, i dont mess around with retarded oil brands. I get the best. Plus I run 20:1. It's rich but not too rich to wear I have to clear the plugs all the time. PLus I'd rather have fouled plugs than a top-end to rebuild. ~Ryan

my buddy put on some clear hoses and they melted. I dont know what kind they were or what. but then i week later he had different hoses (clear) but they had the braid. He is on alchy so he is going to run a little cooler anyway. Dont know where he got them. He gets a lot of weird things. He repairs x-ray machines in hospitals n shit. so go figure.

I did have pics of the banshee and her posing on it, naked. <---lol, jk But we broke up. It was my bike but she "gurlied" it all out. I took the bike back, ripped the gurly stuff on. Threw on some chrome and put a 2-5 over-ride on it and sold it. LOL

Iv'e heard it produces more power. I would have them to check them out but as far as I know, they are not out for banshee's yet.

LOL, thats some funny stuff. I told my kid bro to do that and the rooster attacked him as well. Didn't hurt him much. There was a couple of scrathes, here and there. But later that day the head of that chicken was taken off as well. SPIDERS!!! I used to do HVAC work in a small town. In small town there are trailers. They bottoms dont touch the ground so u have that 2 foot space for plumbing and wiring. Well, older houses have massive spiders. Big, nasty, furry, baby carrying spiders. Just think about a mother spider with al those hundreds of babies on its back. Think of how many eyes are staring at you, then. lol! That freaks me out. Especially when u want it to go away and throw a tool at it. Then the babies go running everywhere. Your so cramped, you can run away, and just hope that they hate the drop light that u have down there. Cuz that's the only thing closest. LOL. What I can't see. How many of you go to Buttercup? I go about just as much as Glamis. You all know the bridge at Buttercup? I swim there almost everytime I go. But I cant swim out to the center where the support posts are because I cant see below me. I jump off the bridge in the middle of the canal but I dont swim by those poles. I make sure I'm way away. LOL. I dont want some man-eating fish thing to bite off my pinky toe. Later.....~Ryan

LOL, thats funny. I can just feel the hatred in this thread already. I just got back from Victorville, CA, and this lady said she races her quad. She weighed about 260 lbs, give a take a few. I started talking to her about it, knowing that she was full oh sh!t. "My qaud goes 80 mph behind my mustang!!" "Yeh right lady, you had it on your trailer, huh?" *Theres another prime example of people trying to be cool to kick it. LOL* The i would done this people really piss me off, probly alog with the: "where to you wanna go?" "I dunno where do you wanna go?", people. Let;s just face it. People suck. have agreat day.....~Ryan

I was at the dunes for a night ride a couple weeks ago when I heard a drunk, stumbling bundle of sticks say that his banshee runs better without oil. I'm sure it does, lol. But not for long. (Kaboom!) What are some of the pet-peaves that people do to their bikes that really piss you off??? ~Ryan

CPI in-frames give u the most top-end, and u can still dune them. umm, if u want a pipe that give u good mid-top get t-5's. If u are going to keep your motor stock, get T-6's. <--- not good for ports or bores. I'm pushing 74.5 horse out of T-5's. But the next mod is CPI inf-frames. It's cool when i beat people with CPI on my T-5's. They get mad....lol.