John19

send pics to darklord2025@hotmail.com

bending the steering stem is easy to do, take a tie-down and wrap it around where the bars mount up to the clamps (just below the bar, hook it to the steem itself) then tie the other end to a pole or a tree whatever then lift te back of the banshee up and tighten the tie-down while it is up in the air. At this point you should be able to let go and the ass end of the shee will be up in the air with no one holding it up there. GENTLY push the back end of the banshee down kinda bounce it and it will go back straight with the proper ammount of pressure. Take your time then all u gotta do is put the tank/radiator cover back on and go ride!

Please send all pics to darklord2025@hotmail.com definately interested.

bump^2

You need some tread on the rear man!

send pics to darklord2025@hotmail.com

I want the silver plastic, and the blue! PM me a price shipped.

what kind of tires and rims do you have?

anyone?

Drink one for me.

Yamalube

Look's easy to make, awesome idea and props to the original inventor!

Sent you a PM yesterday

I run a -2 swingarm, 13/41 gearing, some mild porting +3 timing, bored .40 over wiseco pistons, stock carbs and fmf fatties ( power core 1's old school) well the chrome is really dull on my pipes now that they are like 6 years old, I have been debating getting new pipes and really like the rockets. I'am wanting to build a torque monster/still fast. What do you guys think about switching to these rocket pipes? Would I be wasing my money, would I have to change jet sizes? upgrade carbs? ect. I eventually want a 4mm stroker by jim. Any suggestions to fit my needs? Sorry, didn't mean to get off topic here just curious! I ride mostley in the sand, some trails and would eventually want to do some flat tracking.

You can almost get an aftermarket DG one for around that I believe

I'am also interested in the roller.

BUMP

74055 very interested

You have a PM

you have a PM

Wanted: Aftermarket a-arms and shocks. Want something to give the shee a better ride!

Are you parting it out? If so iam in on some of the parts

I need the left side cascade side cover, flywheel side. Thanks

What kind of plastic do you have, and what kind of tires?

I need new chain/sprockets for the shee... what's the best place to get them online and the cheepest. Just need to know what to get thanks guys!