Im-Loving-It 69

i dont think that i retarted it, i did the timing plat mod that was in here. also it is comming out bothe pipes

But its not just spraying out a little, when IM running it and i nut the gas i have 3 foot long spray and its not just a mist its like fuel injectors in a car spraying out. and how do i tell if IM running rich, because i done want to run it long because IM done want gas getting down into my crank oil and thinning it out and locking up my bottom end. also it's black

No, I don't think that IM running rich because I have the same carb that I had on there before I split the case and redid the hole shee. what about the timing? Would that have any thing to do with it. right now its 4 degrees advanced.

When i start my shee up and i hit the gas, liquid sprays out my silencers and it shooting out a lot of it!! And I wipe it up with a rag and take a litter to it and its flammable so IM thinking its gas. So please lend your advice.

bull gap is a fun place to ride, but its a long ways to ride on a banshee from the Pink store. Also Were to you live at in michigan?

Can you ever run to cold. lets say you have a cool head, inline cooler, a diffrent radiator and engine ice. will that make it run too cold. and what will happen if it is runiin to cold?

Has any one here rode the trials in Rose City? If you know what im talking about then you know about the pink store anyways i love riding ther, i trail go on for ever and theris many diffrent riding types.

I powdrcoated my A-arms. All you have to do is get all the melted/hard grees out of the ball joints befor you put them back together. and i have had no problem with them and i powdercoated them about a year ago. Alsoyou can buy a powdrcoat paint, I have used this of a few thatgs and it withstands alot mor then any paint that i have seen.

Thanks that helps out alot. I will have to go and check some of these things out when i get home.

Ok if i dont have an air leak Then why as soon an i start it up it is reving/ idlins at its peke Rmp and if i dont shut if off it will blow up. i know it not in the slide are not open because i took the cables right of of the cabe so thay would seet all the way down. I relly need some help here so please help me out

Is it true that all 2 stroke ATV and Dirt bikes are getting discontinued in 2006 The reson that im asking is because when i went to the yamaha dealer to look at buying a new YZ 250 the dude told me that all 2 strock are geting discontinued in 2006!!! I know that some day they are geting discontinued but i dident think that it would be that soon I just want to get you thoughts on this.

That is the dumbes thing that i have ever seen. If you like the look of a Raptor then go buy a Raptor.

Ya you can use them with your setup.

Thats a bad ass Shee!!! But why do you think he is runing such a small tire?

I thought it sounded good so I went and did it and I really works great. Thanks for you Trick

OK IM not sure what type or carbs I have on my see right now but I know that they are Keith carbs but there slides are like oval shaped and instead of having a screw on tops they is two little bolts that hold the tops on. Do you know what the f*ck they are. And what the stock jetting is on them, 30 mm Also oil is spraying out.

So maybe i have a sir leak in the crank seal and its sucking oil in to the motor?

I also do that. Easy to tell and its free

But i also have an air leak coming from some were in the motor. i know its not coming from the carb boots because i looked then over good.

Oh im sorry I used yamabond. The stuff that you put betwee the two halfs of the cases.

Because i thought it would make a better seal around the seals.

Also Im mixture is 40-1

Please Help me out i need some answers

But my slides onley go in one way.

i just put new crank seals in. And when i put them in i put some yama lube around them. ? was that a bad thing to do ?