cjc
Members-
Posts
157 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by cjc
-
nice shocks I have the same type , but those are stage 3's , stage 4's are duel speed comp . brand new 995.00 fronts , 795.00 rear + the linkage . I came back to it and Matt already got to it !!
-
I like it ! im fixin to build up a warrior for my kids friend to FT race with . I hope it does better than this one !!
-
YFZ450 A-Arms, Spindles, Brakes.
cjc replied to 007banshee's topic in For Sale - Parts & Accessories
PM sent -
YFZ450 A-Arms, Spindles, Brakes.
cjc replied to 007banshee's topic in For Sale - Parts & Accessories
Ill take the spindles if there in great condition ! Pm a shipping quote to 34488 -
when dirty foot opens the trails and camping back up you could ride there you got that SHEE in you pic set up for drag or flat track ?
-
Im not sure what brand intake you have ,but our heavly ported 370 with a 35 pwk has 180 main 48 pilot with a gradon type 2-1 at sea level. you may be lean at 3/4- full throttle , and a little rich on the pilot and on your needle . and the above poster was correct the needle is very critical on the 2-1 !!
-
38 PWK SOLD to me !! thanks Thomas , this will work good on the kids blaster !
-
payment sent !
-
I'll take the 38 setup pm me your paypal
-
If the Orings arn't frayed or otherwise skruffy looking, you may get away with it ,but I wouldnt chance it ! TDR has the Orings and their in FL, you can get then the next day ! BUY SPARES !!
-
If your careful you can do it thru the plug hole,just use a LONG piece of solder, bent at the end . be sure to place the solder parallel with the wrist pin CL ,and get it against the cylinder.
-
if you keep your A/F tune safe you should be able to run 93 ,but your on the edge of the SAFE limit ! have you checked your squish clearence ?
-
if you remove the domes from the coolhead ,the CC size should be stamped on them. you will more than likely need a set of orings to reassemble it. looking at PSI #'s ,if your she has stock port timmings you should have around 20 cc domes
-
MULL ENGINEERING BILLET SHIFT STAR NOW AVAILABLE!
cjc replied to blowit's topic in Sponsor Spotlight
are these heat treated ? -
nice bike ,good luck with the sale ! If it dont sell soon take it to DFA for some drag racing !!
-
How would Hoosier Tri Trac tires be on the street?
cjc replied to jsottile's topic in General Banshee Discussion
thats a good choice for the varied types of riding you do . the Tri tracks will work well on the dirt roads and hold up good for the street riding ,they have deep tread depth . If you run it really hard,I would get the hardest compound you can find , Hoosies has a t-25 compound in that style tire . you can also get them for a 9" dia wheel . -
RACE IS CANCELED
-
alright people, we haven't had any good racing in a while,(**** hurricanes), were in need of some good competition and need to get some TnT done , Do you guys need some TnT before Busco !!! they are having the normal $$ brackets and heads up classes $$. and for those intimidated by the lights, maybe some arm drop grudge racing, you can barter for lengths ,lanes, $$ !! they will have heads up classes from stock to modded and full tilt drag machines. bring out those built 2 strokes and fast 4 strokes !! racing on Sunday ,TNT starting at 10:00 am DFA contact info Phone (863) 245-3676 Email DFA home page http://www.dirtyfootadventures.com/
-
Florida riders Hard Rock MX FREE RIDE day 6-19-11
cjc replied to cjc's topic in Riding and Events Forum
no trails ,I think its normally $25.00 per day -
Hard Rock MX is having a free ride day June 19th http://www.hardrockmx.com/FathersDay.pdf they will be having their first race on the new Drag strip dirt drags MX Flat Track hill climbs freestyle www.hardrockmx.com 352-732-6697
-
A 370 could be built a couple ways, a stock stroke with oversized 66mm pistons or a +4mm crank and stock bore is a 373 or a 397 for both used together. porting would be a great gain on either ,a must for the +4 crank to make the best power .
-
tires !!!!!! SOLD !!!!!!
-
The next scheduled 300' dirt drags are on 4-30-11 Dirty Foot Adventures is having their next scheduled 300' $$ heads up and bracket races $$ on April 30th 2011 Gather all your Family, friends ,and riding buddies ,and get set for some grudge racing !! they are also planning on having a $$ poker run on Sunday morning. There is something for everyone, 1800 acres with tons of nice trails to ride, NEWLY cut GNCC course, an mx track , oval track, huge mud pit areas ,HUGE camping areas, a swimming hole with a zip line ,showers ,bike wash,300' dirt drag practice track, DFMR is a very nice place to hang out and have fun ,bring your whole family and all your friends ,we have a blast whenever we go !! DFMR will open early on Friday @ 12pm and close down on Sunday @ 5pm they will have several events throughout the weekend including Drag Racing, a Poker Run and a few others. The Drag race format will be as follows: On Saturday we will be having 2 different drag races, heads up with separate classes, and bracket racing. here is a few videos from the last race weekends Video's Banshee VS hybrid r1 Raptor 421 vs. 472 Banshee's Hybrid's r1 Raptor VS hybrid Gixxer Banshee photo gallery trails, track, camping areas http://www.dirtyfootadventures.com/mud/gallery/ Website: http://www.dirtyfootmudranch.com Facebook: http://www.facebook.....=17&ajaxpipe=1 The events will start @ 10am with test and tune. This will be the time the bracket racers can determine their dial in time. The heads up racers can work on dialing in the right set up, the test and tune will run for 2 hours ending @ 12pm. at 12pm the track will be prepped, this will last between 30 minutes and a hour. After the break we will start the bracket races. It will be a double elimination race. Following the bracket races we will do some track maintenance and roll right into the heads up races. This will also be a double elimination race. After the races we will present awards, ($ cash $) to the winners then after the scheduled races it's time for some GRUDGE racing. racing each other for the fun of it or put some cash up to make it interesting. Please note that every racer must have at least a helmet ,goggles ,gloves are highly recommended. The only other requirement is a racing number (posted on the right side of the vehicle). If you do not have one we will write your number down on a piece of paper that can be worn on your jersey or race vehicle. The cost for each race is $15 ,of that $10 goes to the winners pot. You may choose to run both bracket and heads up races if you like. Location: Singletary Rd Fort Meade, FL Phone: 863-245-3676 Gates are open: Friday 3:00 pm - 8:00 pm Saturday 8:00 am - 8:00 pm Sunday 8:00 am - 5:00 pm Payment Option: Cash Only These prices include use of the entire park as well as camping for the entire weekend Weekend Membership rates are per person: 13 yrs and older: $20 6-12 yrs of age: $10 5 and under: FREE spectators (NON RIDERS) attending the race on SAT only pay $10 gate fee Directions from US 27 in Polk County: Go west on Avon Park Cut Off Rd to Singletary Rd and turn left. The entrance to DFMR is approx one mile on the left. Directions from US 17 in Hardee County: Go east on County Line Rd in Bowling Green, FL to Singletary Rd and turn left. The entrance to DFMR is approx a half a mile on the right

