fourwheelin24

let me know what you have.

i have a mx ready 03 banshee if interested let me know and i will give you all the imfo. thanks

i am thinking about going with a 4mil. stroker and 5mil longrod kit has anyone used it and does it make a big difference, i have ported cylinder and trinity 2into1 carbs, let me know what type of power i would get, thanks

here i have a nice 03 banshee that i may be interesed in trading for a 450 four stroke, it looks and runs great, here is what i have, ENGINE new hot rods crank stock stroke new wiseco piston trinity ported and polished for pro mx bored .80 over pro design cool head with 19cc domes pro design mega flow impeller complete 8 plate hinson clutch kit hinson pressure plate hinson clutch basket hinson inner hub trinity stage IV intake system with 35mm carb vforce 3 reed valves engine has 150 lbs of compression complete fmf fatty pipes with power core 2 silencers that have been cut, FRAME stock frame chrome LSR swing arm RAD bearing carrier Durable Eliminator axle stock revalved and new spring rear shock front ASR +2+1 a-arms with both caster and camber adjustments front triple rate shock with remote reservoirs Gibson rebuildable steering stabilizer front and rear braided stainless brake lines front baha wheels with razar 2 tires rear stock wheels with kenda klaws Renthal bars front AC racing bumper rear AC grab bar AC racing pro peg nerf bars with heel guard i am over looking alot more, this is a great banshee and runs like a bat out of he_ _ , i am looking to sell for 4000.00 or trade. what do you have?? i have pic's of the banshee but i don't know how to post them. just give me your email address and i will send you pic's.

do you still have the banshee and pipes, would you be interested in trading for a 96 220 bayou that looks and runs good with title.

here i have a nice 03 banshee that i may be interesed in trading for a 450 four stroke, it looks and runs great, here is what i have, ENGINE new hot rods crank stock stroke new wiseco piston trinity ported and polished for pro mx bored .80 over pro design cool head with 19cc domes pro design mega flow impeller complete 8 plate hinson clutch kit hinson pressure plate hinson clutch basket hinson inner hub trinity stage IV intake system with 35mm carb vforce 3 reed valves engine has 150 lbs of compression complete fmf fatty pipes with power core 2 silencers that have been cut, FRAME stock frame chrome LSR swing arm RAD bearing carrier Durable Eliminator axle stock revalved and new spring rear shock front ASR +2+1 a-arms with both caster and camber adjustments front triple rate shock with remote reservoirs Gibson rebuildable steering stabilizer front and rear braided stainless brake lines front baha wheels with razar 2 tires rear stock wheels with kenda klaws Renthal bars front AC racing bumper rear AC grab bar AC racing pro peg nerf bars with heel guard i am over looking alot more, this is a great banshee and runs like a bat out of he_ _ , i am looking to trade for a nice 450 four stroke, yfz,trx,ltr, or maybe a hybird i will get you some pic's just give me your email address, and i will send pic's, thanks

i am in eastern ky,

i am in eastern ky, and would like to get 1000.00 obo

I have a 96 kawasaki 220 bayou that look good and runs good has 4 new tires on it. front and back rack, with title will sell or trade, i will trade on about anything. let me know what you have.

I have a 96 kawasaki 220 bayou that look good and runs good has 4 new tires on it. front and back rack, with title will sell or trade, i will trade on about anything. let me know what you have.

i have a 1996 kawaski 220 with title that runs with new rear tires it needs front tires, and the valves need adjusted or may need rocker arms, but it does fire right up and runs good, i was asking 700.00 for it, let me know i am in eastern ky, you are about 6 hours from me, thanks

it might be something else but i have new hotrod crank,new wiseco piston,coolhead with 19cc domes and compression is 150 per cylinder,

have you seen the vforce 3 reeds they have a small hole on the intake side, unlike the vforce 2 and stock i have a set of stock reeds coming and i will see if that works, thanks

the float is fine i am thinking the it is the way the vforce 3 reeds have a small hole and is not as open at the stock reeds or another set of reeds, i am waiting on a set of reeds to come in, thanks for the comment

i am having trouble with the carb, or intake, i am running with vforce 3 reeds, what the problem that i am having is with the carb turned straight up the left side is going flat with about 1/4 throttle, and i can turn the carb to the left alittle and it lets the left side run great and the right side will go flat about 1/2 to 3/4 throttle, i have tried another carb tonight and it did the same, have anyone ran the vforce 3 reeds with this set up??? and what do you think i should do?? thanks melton

hello i don't have the stock carbs i am looking for a set of 34mm or 35mm are you looking to do some trading or selling, thanks

what is the bottom dollor shipped for the carbs, and do you have any pic's of them if so send pic's to mlrogers@mikrotec.com thanks melton

i am interested in the 36mm carbs, do you have the intakes and also. would you be interested in trading for a trinity stage 4 carb kit with 35mm pwk carb cable and filter, thanks

please send pic's to mlrogers@mikrotec.com thanks

i have one it is the trinity stage 4 with the 35mm pwk carb and k&n slip on filter, i will sell or trade for a set of 35mm dual carb set up. if you are interested let me know. thanks

please send pic's to mlrogers@mikrotec.com thanks

HELLO I HAVE A TRINITY STAGE 4 INTAKE WITH A PWK 35MM CARB, IT HAS A K AND N FILTER, I AM LOOKING TO TRADE THAT SET UP FOR A COMPLETE SET UP OF 2 CARBS I NEED THE BOOTS,CARBS, AND FILTERS, I WOULD LIKE TO HAVE A SET OF 34MM OR WOULD LIKE TO HERE WHAT YOU HAVE, THANKS

i will give you $100.00 for them

how much for the t5's thanks

i have a set of 22mm domes and i am looking for 19 if you are interested let me know, thanks