wheeleymaster99
-
Posts
549 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Gallery
Store
Everything posted by wheeleymaster99
-
yeah what all are you goin to sell i'm looking 4 shocks and a-arms and gettin really close to a pair of tires
-
How Much Can I Advance Timing And Run On 93?
wheeleymaster99 replied to excess's topic in Banshee Repairs and Mods
yeah i wouldent go any over +4 thats what i have mine set at and it rund great (when it wants to) -
yeah they are exspencive and i've heard some bad things about them
-
so what do you think i should jet it to i had 310 mains and stock piolet and it ran like crap
-
i think theres some here they say avable in +3 but i cant find any prices but you can look around sry i cant link it http://www.motojoe.com/atv/lonestar/chascomp/aarm.htm
-
i had a blaster and a banshee at the same time and i know the rears dont fit but not sure about front
-
i'm pritty sure the raptor perch will work raptor and banshees frame are a lot alike
-
i think a stock banshees top sepped is some were around 72 and you have quite a bit done to it so i would say maby around 75
-
what you need to do it get a what is called a ratio rite they are $4.49 from rickey moutain atv and mix it some were around 32:1
-
How To Start A Cold Banshee Motor I.e Choke Etc
wheeleymaster99 replied to ninjamaster's topic in Banshee Repairs and Mods
what i do is put it in nutral and pull choke out all the way and kick it with no gas at all i dont know if yours will do this but mine will start to idle and i just give it a little gas to keep it runnin in tell its warm enough to idle -
are both clynerds not fireing or just one have you checked the plug wires they could possably have a bad connection or something like that
-
does anyone have suggestions on what i should gap my plugs to i ues ngk BR8ES and currently gap them at 40
-
yeah i am right around kansas city ks and got little sahara OK about 4 times a year if i can figure out how to post pics i'm goin to put some pics of me jumping there
-
i let it idle to warm up but after that i ride it really hard. but i'm not sure of my elvation i like in kansas if that helps
-
if you drag in the sand ever you would prob wantto go about 1-2 teeth bigger on the back
-
i am running 40:1 castor 927 main jets are 290 and piolet is 30 i have a few mods as you can see below
-
What Stock Quads Will Be A Banshee?
wheeleymaster99 replied to ninjamaster's topic in General Banshee Discussion
the shee could beat a sotck raptor eveen it it had a few mods. my friend has a stock raptor and we raced and i killed him eveen though i have a few mods you should beat a stock raptor -
i couldent rally tell you i havent raced any stock 250s but a lot of the drag race depends on the rider just like any type of rideing so it they rider of the 250 has been rideing for a lot longer there are chances he could win
-
it could be the stator being worn out but it being a 02 i couldent beleave that could be the porb my stator went out but mines a 99
-
yeah it's been out 4 some time it was in atv sport a few weeks agao if i rember right
-
i use B8ES and gap them at 40 and they work but i would like to klnow some other sizes to gap to
-
every ones got to like limb bizket
-
there was a group of guys at little shara with about 3 of them and we ran a few drags and they couldent come close but they were all stock it took a little to get them to race me but when they finaly did i killed them everytime we raced but they all had stock tires i'll bet that gave them a little disadvantige in sand
-
are you still useing your stock fuel line if so it mucht have gotten a little stiff and kink easyer it might help if you go a new like a little longer so you dont halft to bend it as tight
-
Are Stock Pistons Ok For...
wheeleymaster99 replied to snowprophet1's topic in Banshee Repairs and Mods
i would say put new pistons in while you have it appart because if its an older shee its always good to put a new top end in evey once and a wile