[Ricky stator adj timing plate help?]

Thanks guys...I will look into that tomorrow...any other pointers to give out? I have already installed it once and when I ran the engine the screws backed out of the pick up coil and then it hit the stator and then the bike died...

 

I had to pick up a ricky stator pick up coil off of ebay and I should be attempting this mod again next week with some modifications to the pick up coil mounting holes...

 

Thx again

[Ricky stator adj timing plate help?]

So you guys are talking about around 2-3 o'clock position, just up from the pick up coil or down from the upper stator attach point...Or is it exactly where the case starts to bend to the right at the 3 o'clock position (ref stator)

 

Sorry for the stupid questions

[Ricky stator adj timing plate help?]

Hey guys, I bought a ricky stator adjustable timing plate but I am having difficulty finding the reference mark on the case? Can you help me out here...pics would be good!!

[Adjustable timing plates?]

thanks alot guys, so all I may have to do is a lil filing..thats no biggie....

 

Thanks again..

[Adjustable timing plates?]

Hello again, I want to purchase a adjustable timing plate. Which is a good brand to go with?? Ricky or Trinity or some ones off ebay or does it really matter?

 

Also, when I install it, is there any other issues I should be worried about?

 

thx in advance

[lost to bonestock 04]

I am still running the stock setup.14/41...besides the chart that sredish listed, what difference will that make to top end? Also, I do most of my riding in sand, would changing to a 15 tooth up front be a good idea or bad for the conditions I use the shee in most??

[Skin industries graphics]

Thanks for the input guys.. I will prolly be installing the kit in the new year and when I do I will post some pics.

[Skin industries graphics]

Hey guys, have any one here bought these graphics kits or any like it?..If so, what were some of the issues you had while installing them?

[Fly handlebars]

Why didn't you ask before you bought them?

 

I'm guessing they suck because I've never seen anybody run them. My .02

282477[/snapback]

 

I paid little for them. Thats why i bought them..Oh well, not out very much money then. I'll put them on and try'em anyway

[Fly handlebars]

Why dont you tell us if there good or bad because you own them.

282378[/snapback]

282387[/snapback]

 

OMG thats the answer!!!!! I would tell you but like I said, I just bought them!!! Maybe I should have been more clearer....They are not installed yet..I am just looking for some opinions on people that use them or have used them.

[Fly handlebars]

I just bought a set of fly handlebars. I haven't heard much about them. Anyone with any info, let me know wheather good or bad.

 

Thx

[Stock airbox lid mod]

Thanks guys for the replys!!! Which mod do you think is better? The 1 inch holes or cut the back off the lid?

[Stock airbox lid mod]

Hey guys thanks for the replys..They (toomey) say 12 holes..but I could not find the pictures and BrianEB's pdf instructions didn't attach.

[Stock airbox lid mod]

Hey guys thanks for the replys..They (toomey) say 12 holes..but I could not find the pictures and BrianEB's pdf instructions didn't attach. I am assuming they are 1 inch...If I did this, I know it is going to lean the bike out too much...I currently run stock pilots(25's) and 270 mains. What should I change them too?

 

Thanks again

[Stock airbox lid mod]

Hey guys, I have an 03 banshee with FMF fatty's, pc2 silencers, boyesene power reeds, a uni airfliter and its jetted for sealevel. I recently bought a used stock airbox lid so I could drill some holes in it and get a little more air in there. My question is how many holes should I drill, how big should I drill them and I would prefer not have to re-jet after. If I have to re-jet that ok but i would rather not.

 

Any ideas or has anyone else done this mod before? BTW the snorkel is removed as well.

[next mod?]

I totally agree with the above post...keep the $$$ and save for some pipes and silencers

[Staring Point for Jetting]

what is the altitude above sea level you are at?

[Falling on its face]

Look at your reeds...my friend had the same prob with his Cr250 and it was a broken reed

[Front wheels funny, wohbling]

Swap tires from side to side and take it for a spinand see if it swaps sides or not. I had the same prob after my full rebuild and the rim was bent.

[Fusion Paint & Maier Fenders]

What u are saying is true...flex agent will not help it adhere....my bad but..it will help it later after its painted. If you roll your fender for some reason, its not as likely to crack and flake as bad....Don't get me wrong, it won't stop it but it will help...

 

I've used it lots in other plastic painting application. And also for the price of it, why not mix it in with the paint!

[Parting out shee]

Do u still have the skid plates for sale or am I too late finding this thread!!

[Low end bog]

U may have already tried this but swap out your plugs and see how that works!!!

[Fusion Paint & Maier Fenders]

If you can get the paint to stick, add some flex agent to the paint mix and that should stop the flaking etc....

[Headlight issues]

Yeah I believe it is a wire problem as well...I want to start with the ground...do u know where it is??? Front or rear of the bike??

 

Thx

[Headlight issues]

Yeah, I know how they work depending on the speed of your engine to the stator output, but my problems are happening at steady rpm's....They are still going in and out, bright and dim..

 

Thanks for the reply