Big Blue

MERRY CHRISTMAS!!! all i got for my shee was a swingarm skid plate and some tools to work on it with hope every one had a good cristmas.

I dont remember where but i did read that suzuki is developing a 450 dirt bike and will soon follow with the atv.

I have a never out of package NEW Twist Throttle Conversion Kit by DG Part Number: 50-5119. I bought to put on my shee, after riding a friends it decided i didnt like the twist throttle.

why would you trade a banshee for a ex?

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...&category=43979 Here is another set, someone with access to a dyno should see if they with give up a set for testing.

One of my friends welded his like that, Sweet tat evil.

Siloam Springs, AR about 80 miles straight east of Tulsa.

my friend had 500 and i hardly ever ran if it wasnt the topend it was the botom end.

Do they mill the entire head including the part that sticks out and what is the most that can be taken off?

There are a few sets of 30's on ebay right now for $225 buy it now.

I have the new style pro pegs they are great the only problem i had was getting the right side bolt for the heel guard in, other than that no problems.

no complaints here either.

I know i am planning on getting my motor done this spring if i have the money, and there is a airport about 3 miles from my house.

What is the ideal way to set up to run this.

I dont see why it wouldnt but i would still use lock tite on the nut and the screws.

Quite a few impellers and inline coolers on ebay.

I havent had a bit of trouble out of my raptors tranny, it is late in the serial #'s the only thing i have had to do to it is put a clutch in it and get the starter gear fixed. My buddy picked up the first one at our local shop his bike is #346 and his tranny busted and his bike wasnt even rode hard and ive rode the shit out of mine

send pics to [email protected]

I had no trouble getting mine on slid right into place you might have a problem with yours, i would contact toomey after you try some more.

If yamaha wanted they could probably figure out a way to sell the banshee, trough some sort of aftermarket thing or dont sell a complete quad, have some sort of kit. It is sad that well probably have to depend of the aftermarket companies.

I like it as log as it is just snow and they keep the roads clear, which they dont do very often.

I have a 01 chevy 1500, cowl hood, ghost flames, cold air kit, flowmaster, and 18's.

I live in siloam springs it about 25 miles west of springdale on 412, there used to be a good riding spot in the weddington WMA, but they closed it down this summer to off road vehicles. never been to deepwater or chadwick, I usually head to little sahara several times a year its about a 4 1/2 hour drive from here. Appalacia bay(sp) is just west of tulsa its a pretty good riding spot. UofA has some killer partys if you know where there at or know somebody.

My swingarm skid is under the christmas tree, but im not supposed to know that

Why wont it port well?