bobbybonilla

I just got done bending my second pair or bars, im sick of these weak 7/8" bars, I am looking for some 1 1/8" big bars, and big bar clamps, so I can still use my stock stem. let me know what you have. [email protected]

send me a picture of the amp

Slim Shadys mom, and brother mark used to live in St. Joe for awhile, I think she used to own the taxi company in st joe. His little brothers name was mark or somethin.

OK I got the pipes on tonite, along with a aluminum carrier also, and new chain, and Upp chain slider kit, I didnt get done until around 8pm and then it started pouring, so I took to the streets. My setup was 330 mains 27.5 pilots First impression, was from 0 to 1/4 throttle was what I expected from more top range pipe compared to my old Gnarlies, then 1/4 to 3/4 was just a tad rich, like it just a bit too boggy before powerband, but pretty close, then top end seems way to rich. From 3/4 to WOT, doesnt seem much difference, you can notice by sound, and speed increases, but you dont feel it pull very hard, like it slowly climbs in speed. These Pipes are GI-NORMOUS, I didnt realize how large they were until I compared them with my buddies T-5's. I measure temps, and after running pretty hard the pipes right around my legs are at about 90 to 100 degrees, right at the coolhead where the coolant exit hose is, it is about 160 to 180. Before it was so easy to read temps with my Raytek laser temp gun, now the Rockets are so big, I cant even get a good shot of the coolheads, also you gotta watch those fingers flipping off the fuel shut off valve. I am gonna ride it some more tomorrow, in the daylight, and get a better feel, and go from there.

What gearing? I am from the Show-Me state, I think I need to see some proof.

loco do you have any good riding spots around st joe? My buddy gets back from Hawaii today, and hes got a banshee too, we need to meet up and do some riding, Id like to ride in some new places.

That is kinda what I had figured, because I searched the forums all over, and never once found a post where someone mentioned buy different main needle. He called my phone in the morning, and was asking me if my bike was ported I told him no, and hes like why do you want 310's and 330's and I said it was reccomended to me by some knowledgeable people, and he is like no they dont know what they are talkin about, you should be running a 250 main max with your setup, then he tried to say well if you want the 330 main jet, you better upgrade your main needle which was anodized red for 39 bucks, because he said the stock main needle is to big and doesnt allow enough fuel to even feed past a 290 main jet. I was like well I will try it first and see what happens, and he is like well dont expect it to run right, I am just letting you know ahead of time. What a Vagina Loaf!

I talked to vitos performance today on the phone. I ordered some 330 mains 310 mains, and some 27.5 pilots, he asked me why I wasnt buying new main needle. He said the stock needle will only probably allow up to 290 main jet flow, so it would be poinless without the needle would you guys reommend buying the needle?

I got them from BigBlue on the forums here. they also have them at http://www.inlandatv.com

Alright sweet, Ill start at a 330 main, and go ahead and pick up a 27.5 pilot. Now I need to order these parts, but I figured I would order more than just the 330 mains, because if they arent running quite right I dont wanna wait another 5 days to get a different order. What kind of kits would you reccomend, or does anyone have some for sale? And where to buy them? thanks

I am in Missouri. Elevation 872 feet. Stock Bore K&N lid OFF Stock Carbs 93 Octane Pump gas amsoil 50:1 Coolhead 22cc domes Rocket Pipes Any good starting point suggestions? thanks right now it has 240 mains in it, and im sure stock pilots

The upp slider pack I bought has 2 rollers with it, one is slightly bigger than the other. Which one is supposed to go on top? Which one should go on the bottom? Or does it even really matter? Just noticed tonight thtye were diff sizes, and the picture on the pack of the package doesnt say which one?

Nothing like getting paid to tear up the shitter on the clock I love it! Usually Ill try to wait it out until I get to work, then go clock in, and walk to the back and shit.

I just picked up 2 4ft by 8ft sheets of 3/4" mdf, for a speaker box, each sheet was 23 bucks. Wood prices soar after the hurricanes, now the price is starting to fall back down after the hurricanes from floridia

I mean common now if they can make a toilet from carbon fiber why hasnt someone made a wallet?? This weighs in at 10.9lbs the bowl made of 100% carbon fiber weighs only 2 pounds, the top porcelain piece weighs the other 7.1 lbs.

prove it, lets see some pics

I am starting to guess so? If it is someone that knows how to work with carbon fiber should deff, look into it, there could be some good money, it looked badass.

The other day I was at the mall, and I saw a guy pull out his wallet and it was really carbon fiber, it looked badass, but I never thought to ask him where he got it, because I figured I could find one on ebay or something, all I can find are these shitty knockoffs. His wallet was 100% pure carbon fiber, it didnt have any coating so it was flexible. I lost my wallet when I went to Cancun, so now I need to get one, and what better one to get than the carbon fiber one. If anyone knows where to find one or knows how to work with carbon fiber, let me know thanks nick

Did any catch the AMSOIL banners towards the end during the race? They had two or three I noticed on some haybales.

Ive got a pair of stock gold rear rims in good shape, with hoosiers mounted on them, but im not sure what year model they are from? does it matter?

what brand/color?

Do you have an extra wire I need 15 foot 4ga 15 foot 8ga

What did the whole 10 mm cub setup run you so far, including cubs, internals, and carbs?

anti vibe bars, paired with anti vibe clamps, and stem might help alittle, but I wouldnt expect a huge difference.

damn I live about 2 and half hours from raymore I would love to take a look, but I dont know about the Festiva pulling it all the way home, might have to pull the festiva with the banshee home