Concrete Posted May 20, 2011 Report Share Posted May 20, 2011 'Preciate it.... Quote Link to comment Share on other sites More sharing options...
Phazernut Posted July 24, 2011 Report Share Posted July 24, 2011 I have a tail light from a Yamaha FX Nytro sled that I'm planning to mount. Previous owner removed the tail light completely. Just need to fab up a mounting bracket. Quote Link to comment Share on other sites More sharing options...
monkeybrains04 Posted March 3, 2014 Report Share Posted March 3, 2014 I know this is an old post, but how have the led tail/brake lights held up? Also is a dc conversion required or can the led light be ran off the ac. Quote Link to comment Share on other sites More sharing options...
hoppedupandcutdown Posted March 3, 2014 Report Share Posted March 3, 2014 I've ran a LED taillight off AC forever, no brake light though. Quote Link to comment Share on other sites More sharing options...
Vitalik Posted May 30, 2014 Report Share Posted May 30, 2014 You can use almost any LED product with your stock setup, with the exception of high-power LED's. Hey so I bought lights off eBay there front headlights and there dcs can I use them on my banshee?! Or do I need acs plz let me kno thanks High power LED's require a very specific input voltage. Usually within a range of 1/2 of a volt. Obviously you've watched your stock lights dim at idle, and get super bright at full throttle. The reason for this is halogen and incandescent bulbs will operate on just about any voltage, up to a certain voltage. I've never run a 450 rear light, but I have tested numerous LED products on a Banshee electrical system, and think it will work just fine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.