Banshee Rider239

Looks Nice definitely for a first timer makes me wanna try it, what type of materials did you need to do that ?? An where can i get them from me

wow this was comedy just read four pages lol nice bike though

How much for.wiring harness with cdi box pm me

I was doin hq a Lil fav by knocking a hundred off ...to me a good runnin bike with good exhaust and a stock motor and clean titles is worth $2000 or more easy so im just tryna off them but if you want you can pay the hundred lol but it works both ways I'll take the hundred off consider it done 7500..by any means it's a must I get 2000 for each running bike except the roller because they are definitely worth it

Believe it or not guys da roller Is sold already before the runnin bikes

I have 1 roller and 3 (1992's) that run great clean titles asking $7600 for all or $2000 each and $1500 for the roller... I am located in Fort Myers, Florida 1 1/2 hrs away from Tampa .. For more info and pics call or text 239-410-5885 http://fortmyers.craigslist.org/lee/mcy/2424401394.html

needle missing the hole before

carb side 2

carb side1

carb floats

ok this is a 1990 Mojave 250cc Carb (4 stroke) ....i went an picked up my brother Mujave and i kicked it the first time it crunk up and i drove it down the strreet but it feels like the speed is bein restricted so what i did i opened up the carb to make sure it was clean inside because it have been sitting in a garage for about a year...i notice the needle in the carb was missin the hole when it goes up in down so i took off the top part of the carb an i set the needle to go straight down in the hole instead of leaning a little an put the spring back in the position its suppose to be in then i put everything back together an i went to kick to crank it again it wouldnt crank i have here a few pics of what the carbs look like in the inside an pics of the needle missin the hole before i fixed it ...an the side of the carb has a few adjustments on the side like i see it has a stem in three places where does the gasline go correctly ? and what is the other stem near the gasline stem go to ? because the overflow is at the very bottom of the carb ....the problem i had earlier after i put the carb back together was trying to give it a spin was everytime i turned the gas on all of the gas came straight out of the overflow i got it to stop somehow when i opened up the carb but still cant crank its a adjustments that need to be made can you guys give me some help thanks

where are you from?

Tdrracing.com

Welcome to the hq

I believe if I would have finish adjusting those carbs I wouldve been ok but I broke the screw that goes into the top of the carb sooooooo I just switched back to my stock carbs an they run good

thats the far as they go