Stripped bolt from rear tire.

[shogs]

I was tryin to swap my z400 tires and my banshees holeshots to see if i liked the feel on my 400 before i bought a new set. I have a impact wrench that works with my z400 bolts but not my banshees. I used a hand wrench and one of the bolts is stripped now. How will I get this off? Thanks

[xXBlessedWithDeathXx]

i had to use a angle grinder. if you grind it down close enough without hitting the stud it will fall apart when you twist it with vice grips. thats the best way i found.

[2/2 many banshees]

vise gripes and luck if that don't work cut it off

[Paddleboy]

my cousin bought a set of paddles from a guy and his dumbass bro tryed taking them off for him and stripped it out. we workign on it for like half hour and ending up pounding a socket that was a size smaller on it and taking it off. course then you have to get a new nut.

[bansheejoel]

my cousin bought a set of paddles from a guy and his dumbass bro tryed taking them off for him and stripped it out. we workign on it for like half hour and ending up pounding a socket that was a size smaller on it and taking it off. course then you have to get a new nut.

haha, that was fun wasnt it....i couldnt let those fuckers go for $80 haha i pounded that damn thing on there hard . I still think about going back up there and nailing that kids mom. She was fucking hot :laugh:

[Paddleboy]

haha, that was fun wasnt it....i couldnt let those fuckers go for $80 haha i pounded that damn thing on there hard . I still think about going back up there and nailing that kids mom. She was fucking hot :laugh:

fuck yea she was

[shogs]

Thanks guys i'll try what u said...I just realized though that the tire bolts are into the rim...if that makes sense. Vice grips wont fit and I cant cut it without the rim...so I guess a smaller socket has to work.

[sandunagen]

Thanks guys i'll try what u said...I just realized though that the tire bolts are into the rim...if that makes sense. Vice grips wont fit and I cant cut it without the rim...so I guess a smaller socket has to work.

 

they sell tools for stripped nuts at sears. maybe 15.00 set. work very well. or if u want try a cold chisel and hammer break it off. might damage rim in process. so buy a set or removers.

[714banshee380]

Here's a trick that might work. Get a flathead screwdriver and angle the screwdriver on the bolt, then get a hammer and hammer it and it should unscrew.

[mdhc500]

Dremel with the cut-off wheel... very compact... Good luck dude!!!