Jump to content

Recommended Posts

Posted

Hello, I have a small amount of fuel that continues to leak out of the drain tube of both carbs. Both drain screws are tight. Is this normal? I have not taken it apart to look. I would first like a few diagnostic possibilities before continuing. Only mods T6 with rich carb settings and toomey air filter.

thx

Posted

hey just wondering if you ever figured out why you have the fuel leak. my 03 is doing the same damn thing. i tore both carbs apart and cleaned em out. still doing it. banshee wont even run.

Posted
hey just wondering if you ever figured out why you have the fuel leak. my 03 is doing the same damn thing. i tore both carbs apart and cleaned em out. still doing it. banshee wont even run.

No, I have had no responses and have been working my ars off. I havent taken the carbs apart, I guess it could possibly be the screw itself, but if a proper seal is acquired, I dont see how a leak would be possible. If you come up with anything let me know and I will do the same. thanx

Your Banshee will not start at all? Dies when gas is given???

Posted (edited)
Hello, I have a small amount of fuel that continues to leak out of the drain tube of both carbs. Both drain screws are tight. Is this normal? I have not taken it apart to look. I would first like a few diagnostic possibilities before continuing. Only mods T6 with rich carb settings and toomey air filter.

thx

 

 

The floats being not adjusted properly will cause this.Pull those puppies apart and adjust your floats. -Done deal. Well unless your drain screws are leaking,but thats doubtful. Good luck man!

Edited by shee4speed
Posted

Yes, my buddy had one do the same thing. Stock carbs and the floats were all over the place and it was leaking pretty good. We adjusted them to the proper angle and it was fine after that. Take the bowl off and adjust them.

Posted
Yes, my buddy had one do the same thing. Stock carbs and the floats were all over the place and it was leaking pretty good. We adjusted them to the proper angle and it was fine after that. Take the bowl off and adjust them.

Thank you for the replies, I will pull them this weekend.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...