sa3ood_banshee Posted May 19, 2008 Report Posted May 19, 2008 sup guyz, do stock reeds make noises(flapping noises)? is it normal???? thnxxx sa3ood Quote
njbanshee Posted May 19, 2008 Report Posted May 19, 2008 doesn't sound normal. Pull them out and check them out. Quote
Animalman294 Posted May 21, 2008 Report Posted May 21, 2008 I've never heard them, but then again I wouldn't hear them over my motor anyway.............. Quote
sa3ood_banshee Posted May 21, 2008 Author Report Posted May 21, 2008 check this out banshee tube clip,listen to tha sound from tha engine other than tha exhaust,(when he's taking a vid of tha engine part. hope this helps.thnx sa3ood Quote
FireHead Posted May 21, 2008 Report Posted May 21, 2008 sup guyz, do stock reeds make noises(flapping noises)? is it normal???? thnxxx sa3ood You cannot hear reeds opening and closing. I hear the noise in the vedo you are talking about and I suspectyou might have a little bit of a mis-fire going on their at idle. :geek: Quote
2001Stroker Posted May 21, 2008 Report Posted May 21, 2008 All I'm gettin is a blank white screen, with no audio. Did you erase the vid? Quote
jharader Posted May 21, 2008 Report Posted May 21, 2008 Compression test, sounds like some major piston noise to me (major piston clearance) or as stated above ones not firing correctly Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.