foxracing350 Posted May 13, 2008 Report Share Posted May 13, 2008 ok i had a twist throttle on my shee and i changed it to a thumb throttle and when i changed the cable everything got all messed up first off the tors are removed now it will not start and i have no spark i dont get how i lost spark from changing a cable there are two clips just hangin out under the tank but i belive its always been like that i have no key so i think one is for that does anybody have any suggestions? i can get pics of said clips tommarow if needed Quote Link to comment Share on other sites More sharing options...
xXBlessedWithDeathXx Posted May 13, 2008 Report Share Posted May 13, 2008 the first thing i would look at is to see if your 2 wires are still connected to the coil. Quote Link to comment Share on other sites More sharing options...
foxracing350 Posted May 13, 2008 Author Report Share Posted May 13, 2008 the first thing i would look at is to see if your 2 wires are still connected to the coil. they are Quote Link to comment Share on other sites More sharing options...
foxracing350 Posted May 14, 2008 Author Report Share Posted May 14, 2008 anyone else?????? Quote Link to comment Share on other sites More sharing options...
ItzaBansheeBitch Posted May 14, 2008 Report Share Posted May 14, 2008 Is ALL the tors off? (little black box above the left cyl fucka A LOT of peeps up) Also check the wires running from the coil The little male/female plugs. Quote Link to comment Share on other sites More sharing options...
foxracing350 Posted May 14, 2008 Author Report Share Posted May 14, 2008 yea its all off and i already checked the coil and the plugs i just dont get it all i did was switch throttle cables Quote Link to comment Share on other sites More sharing options...
hylander88 Posted May 15, 2008 Report Share Posted May 15, 2008 (edited) yea its all off and i already checked the coil and the plugs i just dont get it all i did was switch throttle cables you said you have the key switch off do you have a jumper wire on the plug???its the red and black wire for the key switch or do you have them spiced together.... Edited May 15, 2008 by hylander88 Quote Link to comment Share on other sites More sharing options...
foxracing350 Posted May 15, 2008 Author Report Share Posted May 15, 2008 i dont think there is a jumper wire ill have to look at it thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.