i am stumped

[foxracing350]

ok i had a twist throttle on my shee and i changed it to a thumb throttle and when i changed the cable everything got all messed up

first off the tors are removed

now it will not start and i have no spark

i dont get how i lost spark from changing a cable

there are two clips just hangin out under the tank but i belive its always been like that

i have no key so i think one is for that

does anybody have any suggestions?

i can get pics of said clips tommarow if needed

[xXBlessedWithDeathXx]

the first thing i would look at is to see if your 2 wires are still connected to the coil.

[foxracing350]

the first thing i would look at is to see if your 2 wires are still connected to the coil.

 

 

they are

[foxracing350]

anyone else??????

[ItzaBansheeBitch]

Is ALL the tors off? (little black box above the left cyl fucka A LOT of peeps up) Also check the wires running from the coil The little male/female plugs.

[foxracing350]

yea its all off and i already checked the coil and the plugs i just dont get it all i did was switch throttle cables

[hylander88]

yea its all off and i already checked the coil and the plugs i just dont get it all i did was switch throttle cables

you said you have the key switch off do you have a jumper wire on the plug???its the red and black wire for the key switch or do you have them spiced together....

Edited May 15, 2008 by hylander88

[foxracing350]

i dont think there is a jumper wire ill have to look at it

thanks