714banshee380 Posted May 3, 2008 Report Share Posted May 3, 2008 I went to go take a look at my stock axle because I need to remove it to put on this new durablue axle I got for dirt cheap. I don't even know where to start? Any tips are greatly appreciated and any tools you think I will need. Also any parts I need to replace while it's apart Thanks, Steven Quote Link to comment Share on other sites More sharing options...
EastCoast Banshee Posted May 4, 2008 Report Share Posted May 4, 2008 First things first. I recommend you break loose the axle lock nuts before you remove the chain and tires. It can be an utter pain in the ass if you don't. next take both hubs off tires included. Loosen the lock nuts all the way and slide them off the end of the axle. Remove the chain and sprocket hub. After that the axle should slide on out of the carrier. im not good at this so hopefully itll help some. Quote Link to comment Share on other sites More sharing options...
foxracing350 Posted May 7, 2008 Report Share Posted May 7, 2008 i would buy a axle bearing kit to while you have it apart unless they were replaced recently Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.